Rear DIY connector

[ageguy]

I'm looking for the other half of the DIY electrical connector that is behind the plastic covers in the bed of the Maverick. I want to install a USB charger and 12 volt power point in the cubby on the right side but do not want to cut into the trucks existing wiring harness. Has anyone found a source for these connector? My local FORD dealer doesn't show anything in the parts catalog.

Sponsored

 

[BILLNOROVILLE]

why did you post this same question twice. Maybe you should delete one.

 

[Big_T]

One connector is supplied with each Maverick. If it's not in the glove compartment, console, under the rear seat, or behind the rear seat then I suspect someone at the dealership decided they wanted it before you got the truck. Mine was in a Ford labeled plastic bag.

 

[ageguy]

Since you are SO worried about duplicate threads please just delete them. This type of help I don't need.

 

[FriscoTXJoe]

why did you post this same question twice. Maybe you should delete one.

It's Friday. Actually after 12 noon in half the country. Go have a beer and a smile.

Have a good weekend.

 

[ageguy]

Great idea! Cheers!

 

[wjg]

As already mentioned, you should have received 1 with the truck. Getting parts from Ford will be tough right now. You could try the following and cut off speaker connections.

The plug is suppose to be the same.

 

[ageguy]

Where would this be located not under the rear seat, not in glove box, can't even find one in the FORD parts catalog. Thanks but I have looked and tried to buy a replacement since I didn't get one. Do you have a part number off of yours?

 

[FakeCowboy]

Where would this be located not under the rear seat, not in glove box, can't even find one in the FORD parts catalog. Thanks but I have looked and tried to buy a replacement since I didn't get one. Do you have a part number off of yours?

The person selling one for $100 on eBay probably jacked yours.....

You should be able to find those factory connectors to make your own harness. I'll look when I'm finished with my work day to see if I can identify the connector type.

 

[OleFordGuy]

From what i see the Ford Part # is: NZ6Z-1613086-B, see thread https://www.mavericktruckclub.com/forum/threads/so-excited.8653/ but I would imagine the ones from amazon already referenced would be lots cheaper

 

[ageguy]

You may be right. Thank you for any help. Have a great day!

 

[ageguy]

From what i see the Ford Part # is: NZ6Z-1613086-B, see thread https://www.mavericktruckclub.com/forum/threads/so-excited.8653/ but I would imagine the ones from amazon already referenced would be lots cheaper

Thank you!

 

[Big Bob]

This is what came with mine when I picked it up 3 weeks ago.

 

[ageguy]

This is what came with mine when I picked it up 3 weeks ago.

Awesome! Thanks sharing!

 

[nunucello]

I'm looking for the other half of the DIY electrical connector that is behind the plastic covers in the bed of the Maverick. I want to install a USB charger and 12 volt power point in the cubby on the right side but do not want to cut into the trucks existing wiring harness. Has anyone found a source for these connector? My local FORD dealer doesn't show anything in the parts catalog.

I am also looking for another one. Did anyone have any luck sourcing this part from Ford ? Thank You.

Sponsored