Radio Surround

[JPinPA]

Applied this yesterday. Not perfect, but I think it really finishes off that area of the dash.

It’s taken a while to at least “accept” the “laundry tub plastic” look of the door panels and dashboard but it still doesn’t compliment the overall look of the passenger cabin.

Has anybody attempted or seen some sort of vinyl wrap treatment that really compliments the interior?

Sponsored

 

[Happy Guy 823]

You applied what to the dash ? Need photo

 

[JPinPA]

You applied what to the dash ? Need photo

I had originally selected the two photos, but they didn’t post. Edited and attached again.

 

[Oscarcat]

Applied this yesterday. Not perfect, but I think it really finishes off that area of the dash.

It’s taken a while to at least “accept” the “laundry tub plastic” look of the door panels and dashboard but it still doesn’t compliment the overall look of the passenger cabin.

Has anybody attempted or seen some sort of vinyl wrap treatment that really compliments the interior?

That is one of the first mods I did. While $16 for a piece of plastic is expensive, it upgrades the dash and makes the audio controls visually mate with the console area below. [My other mods were the tailgate damper and black tailgate letters]

 

[Cocobean]

Applied this yesterday. Not perfect, but I think it really finishes off that area of the dash.

It’s taken a while to at least “accept” the “laundry tub plastic” look of the door panels and dashboard but it still doesn’t compliment the overall look of the passenger cabin.

Has anybody attempted or seen some sort of vinyl wrap treatment that really compliments the interior?

I did the same thing and definitely agree it looks better. I also purchased the ‘console cover’ as well. Looks good!

 

[Cocobean]

Forgot pics:

 

[Jeff D.]

I bought one of those radio trim pieces on Amazon. I thought it looked nice, but mine was shipped in a box too small which caused it to be bent inside the box for an extended time. I thought the double side tape might hold it down long enough it might eventually flatten out, but it didn't.

Kept springing loose until I finally got mad and threw it in the trash. Went to leave a review and saw I wasn't the only person with the exact same problem. Cheap Chinese crap!

For those considering it, check the reviews before buying one that's deformed from the start.

 

[JPinPA]

Mine had a bow to it too. Nothing a little heat and slow cooling couldn’t handle. I just removed it in order to give the very slight gap areas the once over with a sharpie (thanks for the suggestion @Barracuda340. Have you noted any yellowing spreading from the area you sharpied?)

Sponsored