Parts Mavericks Anywhere?

[Racerx410]

Looking for any leads on Mavericks in Junkyards, Auto Recyclers etc please.

My ABS sensor on my driver's front wheel has rubbed through when the truck was lowered on coilovers and the part is not on a connector/pigtail but rather a length of wire tied into the main harness. 5900$ harness FYI. So im in search of a length of the abs sensor to splice into my harness.

Note: later years apparently Ford decided to make the abs sensor normal with a m/f connector between the main harness and the sensor. So specifically looking for 2022 Models maybe 23 is the same but have not confirmed yet.

My local Pick your part and auto recyclers are bone dry.
I've also tried emailing sellers of used parts on ebay but they seem to take off good parts and get rid of the vehicle.
At least the ones that have replied.

Thanks.

Sponsored

 

[Maverick123]

Did you try www.car-part.com ?

It's an online aggregator for junkyards to list their parts

 

[Castle666]

How far up from the sensor is it rubbed thru?


These pigtails generally come with 6"-8" of wire from the connector.

 

[bgn]

How far up from the sensor is it rubbed thru?


These pigtails generally come with 6"-8" of wire from the connector.

This is what I used for fixing my wheel speed sensor wire. I'd say I can't believe they were dumb enough to leave the last 6-8" of the wire closest to the wheel with just black tape "protecting" it, but unfortunately I can. 2022 EcoBoost. Couple thousand miles, including a couple hundred on forest service roads driving like an ass, and no issues.

I didn't use the metal bits. I used some of the heat shrink connectors I had and the black tubing to protect the connection.

WPT-1626 is the part number.

@Racerx410 I actually have an extra one that USPS lost and then delivered after I requested a replacement from rockauto. If you want it for free, feel free to send me your address and I will send it out today or tomorrow.

 

[Racerx410]

How far up from the sensor is it rubbed thru?


These pigtails generally come with 6"-8" of wire from the connector.

It rubbed through in a section around the knuckle area. The wheel definetly rubbed it at some point probably when I had wheel spacers on if i had to guess.

 

[Racerx410]

This is what I used for fixing my wheel speed sensor wire. I'd say I can't believe they were dumb enough to leave the last 6-8" of the wire closest to the wheel with just black tape "protecting" it, but unfortunately I can. 2022 EcoBoost. Couple thousand miles, including a couple hundred on forest service roads driving like an ass, and no issues.

I didn't use the metal bits. I used some of the heat shrink connectors I had and the black tubing to protect the connection.

WPT-1626 is the part number.

@Racerx410 I actually have an extra one that USPS lost and then delivered after I requested a replacement from rockauto. If you want it for free, feel free to send me your address and I will send it out today or tomorrow.

That is greatly appreciated, I sent you a message.

 

[bgn]

That is greatly appreciated, I sent you a message.

Got it. I'll try to send it out today.

 

[Racerx410]

Got it. I'll try to send it out today.

Thanks again.

 

[NewnHot]

Check the picture feed above about the totaled Maverick and ask where it is?

 

[Racerx410]

Still looking for leads on where any of these Salvage Mavericks end up. So far the auction sites dont show the Sold information after bidding. If anyone has a lead on a Hybrid before MY 23' i'd appreciate it.

Until then the slow search continues while the truck sits.

Sponsored