Need help finding female terminals

[Telemachus]

I'm trying to add the lux lighting features in the bed to my XL.

I have already worked out which pins I need to add on the C404 harness (I'm trying not to tap the wires on the male end).

I cannot find the correct female terminals. Would appreciate help finding them.

The service manual states I can use

CU5T-14474-EB or
DU5T-14474-TAB

I pulled one of the terminals out to get a look at it:

They are smaller than the mx150 I have from adding my tailgate actuator

Sponsored

 

[Clarkdonbran]

I don’t think this is that kind of site!

 

[Telemachus]

I don’t think this is that kind of site!

Then you haven't spent much time with the XL folks!

We bottom of the barrel people, we got mad modification skills LOL.

 

[OleKennyRoy]

Can you make out any markings on them or the connector itself? If it is Molex, you can get the PN and find compatible pins on digi-key.

 

[Telemachus]

I can't. I have to get to them by crawling under the truck, and I could not make out any markings. Tried several different views with zoom on my camera.

 

[Hot Runr Guy]

Maybe the Aptiv 1.5 series? How wide are the male blades?

https://www.aptiv.com/en/solutions/...product?language=en&id=TERM-OCS-1.5-Series_en

HRG

 

[Darnon]

Measure what size the male terminal is and check the Motorcraft Connector guide.

 

[Telemachus]

I'm kind of kicking myself for not taking my calipers out when I got the female pin out.

I guess I could order a different variety of the aptiv female pins. I'm thinking perhaps 0.64.

It just seems strange that the Ford part numbers don't match up with anything.

 

[Telemachus]

None of the data sheets of the APTIV OCS 1.5, 1.2 or 0.64 have any dimensions on the terminals.

It kind of seems to me that that would be an important thing to have on a data sheet...

 

[Exranger]

I'm trying to add the lux lighting features in the bed to my XL.

I have already worked out which pins I need to add on the C404 harness (I'm trying not to tap the wires on the male end).

I cannot find the correct female terminals. Would appreciate help finding them.

The service manual states I can use

CU5T-14474-EB or
DU5T-14474-TAB

I pulled one of the terminals out to get a look at it:

They are smaller than the mx150 I have from adding my tailgate actuator

Go to the dealer with that pic and your vin. Ford is big on pigtails for wire repair. A good parts guy can get you

 

[Hot Runr Guy]

None of the data sheets of the APTIV OCS 1.5, 1.2 or 0.64 have any dimensions on the terminals.

It kind of seems to me that that would be an important thing to have on a data sheet...

Here is the 1.5, the .64 seems to be round.

https://www.mouser.com/datasheet/2/105/Delphi-Connection-Systems-3009891.pdf

HRG

 

[Telemachus]

Go to the dealer with that pic and your vin. Ford is big on pigtails for wire repair. A good parts guy can get you

I'm doing just that.

I think might be it:

https://www.tascaparts.com/oem-parts/ford-terminal-du2z14474ca

And it's in stock at my local Ford.

 

[Telemachus]

That was it. Installed the terminals last night.

Thanks for the help

 

[Timothyd]

I'm trying to add the lux lighting features in the bed to my XL.

I have already worked out which pins I need to add on the C404 harness (I'm trying not to tap the wires on the male end).

I cannot find the correct female terminals. Would appreciate help finding them.

The service manual states I can use

CU5T-14474-EB or
DU5T-14474-TAB

I pulled one of the terminals out to get a look at it:

They are smaller than the mx150 I have from adding my tailgate actuator

Newark Electronics

Sponsored