Finally all but one upgrade and accessories installed!

[mikeakasully]

You Have a couple extra tie down kit bolts, did you nut cert those?

Are you talking about the cargo rails in the bed? If so there are six nutcerts on each side (factory), and I used ALL of them. From the back going forward four M8's and toward the front in close proximity, two m6's.

Sponsored

 

[k2rizzle]

No. Anything below the "A" line (only a few inches from the roof-line) is not legal in Wisconsin.

Gotcha, I didn't catch that part.

 

[mikeakasully]

Gotcha, I didn't catch that part.

Thought about darking the side front windows down to lowest legal limit though.

 

[k2rizzle]

Thought about darking the side front windows down to lowest legal limit though.

You should try it, ~$100 well spent

 

[lajlmt]

Got almost everything finally finished on my 2023 Mav.
Clear door and wheel well edge guards
Front Factory Clear PPF kit
Aftermarket Front Bumper PPF
Wireless Cell Phone Charging
Glass Touch Screen Protector
Triple Camera Dash Cam
Homelink Auto Dim Rear View Mirror
Center Console trim
Line-X Bed Liner
Blacked out Rear High Mount Brake Light and Tail Lights
Installed Factory Mud Guards (Muslogy has Copy-cat ones for WAY cheaper HERE)
Custom Bed Rail Cargo System
Tailgate Assist
Elevate Cargo Box Rails and Rack
Full LED replacements on Turn, Brake, Reverse, and Cargo Lights
Truxedo Pro X15 Roll Up Tonneau Cover
Magnaflow Exhaust w/ twin tips
Also hit the under body parts with a mixture of Fluid Film and B'laster Surface Shield
Hated the holes in the rocker panel covers showing the paint color, so I removed those and painted those areas flat black
Applied Adam's Advanced Graphene Ceramic Spray Coating on all surfaces.

Waiting on my S&B Cold Air Intake

This really is a necessity! Good work!

 

[SoJoMav]

How’d you wire your dashcam?

 

[AngeloInSC]

Got almost everything finally finished on my 2023 Mav.
Clear door and wheel well edge guards
Front Factory Clear PPF kit
Aftermarket Front Bumper PPF
Wireless Cell Phone Charging
Glass Touch Screen Protector
Triple Camera Dash Cam
Homelink Auto Dim Rear View Mirror
Center Console trim
Line-X Bed Liner
Blacked out Rear High Mount Brake Light and Tail Lights
Installed Factory Mud Guards (Muslogy has Copy-cat ones for WAY cheaper HERE)
Custom Bed Rail Cargo System
Tailgate Assist
Elevate Cargo Box Rails and Rack
Full LED replacements on Turn, Brake, Reverse, and Cargo Lights
Truxedo Pro X15 Roll Up Tonneau Cover
Magnaflow Exhaust w/ twin tips
Also hit the under body parts with a mixture of Fluid Film and B'laster Surface Shield
Hated the holes in the rocker panel covers showing the paint color, so I removed those and painted those areas flat black
Applied Adam's Advanced Graphene Ceramic Spray Coating on all surfaces.

Waiting on my S&B Cold Air Intake

Looks like you forgot the taxi light on the roof

 

[mikeakasully]

How’d you wire your dashcam?

I used my custom built harness the plugs into the dome light harness and used a 12v to 5v step down converter: https://amzn.to/3QSL9Zg Then used a USB C pigtail to plug into the camera https://amzn.to/3smSQg6

Sponsored