F-150 Fog Lamp Switch and Wire Harness Installed in Maverick - DIY

[EVH5150]

NICE!! This is a great visual for my crap descriptions.

Sponsored

 

[EVH5150]

And this chart was a lifesaver for the FORScan programming:

Very simple to follow.

 

[EVH5150]

Installed pics:

Lighting Command Central: F150 headlight switch for fog lights, Apiele LED Halo switches for ditch lights and bumper lights.

All of the wiring is run in separate looms with DT weathertite connectors. Diode Dynamics Ditch and Bumper lights are wired using Diode Dynamics' heavy duty wiring harnesses, shortened to appropriate lengths, and of course, the DD fog lights are wired through the BCM using the F150 headlight switch.

 

[Vtec87pr1]

Glad you got it all figured out sorry did not read your msg earlier.

 

[mtree]

Started getting wire harness . Made waiting on

Started getting wire harness . Made waiting on wire loom and fog lamp conector. Will need to know wich bumper and fog lamps you guys are installing so i can make this harness with enough wire for you guys. Thanks

I may be putting my fogs on a grill light bar. What are the specifics of a compatible fog light unit?

 

[Vtec87pr1]

Your interested?

 

[Vtec87pr1]

Another happy Customer with his own 2025 Ford Maverick custom brackets and fog lights harness made by me. The brackets im not sure where he got it from.

For ppl that want to contact me please reach out my instagram vtec87pr.

 

[chrissypissy]

I wanted to Install Some Ford Fog Lamps on the Truck and seem that Ford Escape as the same Bcm conector as the Ford Maverick.

I Checked and Found that Ford Escape , Ford F150 and Ford explorer had similar headlamp switch. I Found one on Ebay that came from a Ford f150 with the factory fog lamp switch on the center dial. Install it and with forscan enable it. Heres some pics of the process. Need to enable on BCM and IPC .

UPDATE F 150 HEADLAMP SWITCH FORD PART NUMBER ML3Z11654BC .

Update hybrid fuel release door f150 part number ML3Z-11654-DB . Not tested but i belive should work.

UPDATE 2 / 3 / 2023

BCM TERMINALS PART NUMBERS WT-1003

link showing how to un pin connectors and install them.

I wanted to Install Some Ford Fog Lamps on the Truck and seem that Ford Escape as the same Bcm conector as the Ford Maverick.

I Checked and Found that Ford Escape , Ford F150 and Ford explorer had similar headlamp switch. I Found one on Ebay that came from a Ford f150 with the factory fog lamp switch on the center dial. Install it and with forscan enable it. Heres some pics of the process. Need to enable on BCM and IPC .

UPDATE F 150 HEADLAMP SWITCH FORD PART NUMBER ML3Z11654BC .

Update hybrid fuel release door f150 part number ML3Z-11654-DB . Not tested but i belive should work.

UPDATE 2 / 3 / 2023

BCM TERMINALS PART NUMBERS WT-1003

link showing how to un pin connectors and install them.

hey bro I’m doing this conversion, the pin 6 and 7 are those both power wires? Or are those power and ground. I appreciate the information. Thank you in advance. This has all been super helpful.

 

[EVH5150]

Those wires from the BCM are both positive, one is for the left light, the other for the right.

 

[Nemo]

Thank you Vtec87pr1 and everyone else who contributed to this thread. Took me two days to get everything done, but I now have a nice factory looking install.

Possibly someone mentioned before, but the bumper where it meets the fender at the top near the headlight, is not as easy to pop out as the video makes it look. Had to squeeze the clips from the back, in order to pop them out from the fender.

Tried the Forscan option for Fog and Cornering, but the cornering part doesn’t work. Possibly because that option is only under each fog light and not in the general fog light usage.

Also, not a big deal or anything, but it seems like after relocating the speaker for the hybrid with the provided bracket from Diode Dynamics, it somehow made it a little louder.

 

[Dad]

Thank you Vtec87pr1 and everyone else who contributed to this thread. Took me two days to get everything done, but I now have a nice factory looking install.

Possibly someone mentioned before, but the bumper where it meets the fender at the top near the headlight, is not as easy to pop out as the video makes it look. Had to squeeze the clips from the back, in order to pop them out from the fender.

Tried the Forscan option for Fog and Cornering, but the cornering part doesn’t work. Possibly because that option is only under each fog light and not in the general fog light usage.

Also, not a big deal or anything, but it seems like after relocating the speaker for the hybrid with the provided bracket from Diode Dynamics, it somehow made it a little louder.

Some would think making it louder would be a plus.

Sponsored