Search results

Downloaded the Blanking Plate model from Printables https://www.printables.com/model/159528-ford-maverick-bed-outlet-cover-2022-ford-maverick Modified it so there was a hole for the outlet - and needed to beef up the top clip so it would not break.

Does anyone know the part number for the 12V DC pop out plate is ? Or where to order one ? Thank You.

My Hybrid XLT spare tire does not have a wheel lock. Should I have received one as standard, or was it an add on ? Thank You.

I thought it would be cool to have a bluetooth OBD2 adaptor and use my phone to show gauges - especially the volt meter. The plan is to use iOS app called OBD Link and one of these adaptors. The concern is to make sure the OBD2 adaptor does not drain the battery - only one of the adaptor...

Hello MTC - I need advice with snaking the long Dash Cam Power Cable from the unit to the 12V dash port. Never tried something like this. I will need to tuck the cable under the front ceiling trim, remove the A Pillar panel, go under the glove box - and somehow close to the 12V dash socket...

Hello MTC .... Can anyone recommend the proper type of trim tools I should use to run/hide my front dash cam wire. Maybe something like this : or this : or this : Thank you very much.

When installing LED light strips for the bed on each side, how should you orient the LEDs ? Downward/Vertical or Horizontal/Facing opposite bed side ? Thank you for all of your help.

I have had the BAK Revolver X4s installed for couple of months now. I like the cover a lot and would recommend. When it rains there is some water in the bed toward the tailgate on each side - as well on both sides by the cab. I installed it well - and have double the insulation seals up by...

Installed the mounts for Thru Axel and Quick Release today. Hope you enjoy the pics.

Yes - you can power a drill with the bed outlet. Just need to have the engine on.

Picked up Hybrid Maverick March 31 with a full tank from dealer. On this tank I drove 647.7 miles with an estimated 30 miles still remaining. Filled up today with 14.051 gallons of 87 octane. Assuming that the dealer also put in 14 gallons - that would be 46 MPG total. Majority of this was...

Printed both the adaptor and holder for the cubby slot. Works great. Highly Recommend. Used velcro to secure the adaptor to the back of the cubby. The FITS adaptor for cubby: https://www.printables.com/model/159543-ford-fits-cubby-hole-adapter-v1-2022-ford-maverick The phone holder...

NY/NYC can be hard on vehicles when parked on the street. Been reared three times by drivers not paying attention and tailgating in previous vehicles. I wanted to make something which will protect me from being hit by tailgating drivers. So here it is.... Steel guard which is attached to the...

Still on original tank of gas from dealer on 03/31. Have done 518 miles to date and an estimated 165 miles until empty. Most trips are about 30 miles each way for me. Since I am breaking in engine I am not going over 55mph.

Used my Ford Points to order the "Lund Aeroskin II Hood Protector" from my Ford Dealer. What I received is different - it is Textured (not smoke) but does not have the rise on the protector. The Part # for the Aeroskin II does not even show up in Ford Dealer Parts computer system. What I...

Does anyone know if things/icons pop up in the Driver Assist display dash window ? I'm guessing maybe a car icon pops up if you get too close or something ? Please see attached pic. Thank you √ This is on the Hybrid XLT Lux + CP 360 - this is not a Larient.

I noticed when I roll up the driver's side window there is grease streak along the exterior window. I wipe it off, roll down window... then when I roll it up a new grease streak appears. My guess is that the window motor gear was excessively greased ?

I would like to replace the interior dome lights with RED colored bulbs for night time viewing. I don't want to damage anything and was looking for advice on how to remove the clear coverings to gain access to the existing bulbs. I attached a pic which shows what looks like slits on the covers...

What would be the best type of jumper cables to have for the Maverick Hybrid ? 1. Guage Type (I'm thinking #2) 2. Copper vs Copper Clad Aluminum (I'm thinking Copper) 3. Amperage (maybe 600 Amps rated ?) I checked the Maverick manual and did not find any spec suggestions for jumper cables...

1. My Ford dealership says they expect Hybrid Maverick delivery on Feb 2 2 Ford Vehicle Tracking has always just showed "Order Confirmed" since July 2021 3. Never received any emails from Ford 4. Called Ford Customer Service and gave them my VIN - and said only shows "Order Confirmed" How does...