Search results

I had this happen on my Maverick XLT as well. They fixed it under warranty as it is a known issue. They will replace with a new switch module.

I like this mod. Do you have a link to the lights you used? Cheers

I used the procedure from @Nighowl2000 It’s simpler if you are unsure about changing hex codes. It’s essentially enabling items that are disabled. The hex version does the same thing and will be the end result in changes to as built done by enabling. You can set the windows to close upon...

Removed the glove box today. The wires for the ambient lighting are protruding from the main wire harness that goes to the large circular blower which is front and centre. To the left of the blower you’ll see wires leading to a coupler which has yellow and green wires visible. Use a pry tool...

UPDATE: Removing the glove box does in fact give full access to the ambient light wiring featured in Lariat models. Pictures in a later post. Would removing the glove box have made it any easier to access the light? Going to try this, this week. I’ll post an update if it does.

These connectors can be used under the hood. Used them on mine. Use this to tie in Curt Manufacturing 58030 4 Way Flat 12 In Trailer Bonded Bulk https://a.co/d/b4i4FKG or you can just cut off the end and spice directly

Here you go. Did mine yesterday. With an angled 90 USB C fed the wire over the top and around back and plugged in stuck with double sided tape underneath.

Yes, as built data was loaded into it. I’m sure it’s a setting somwhere I have to find.

High series cluster from a 2020 Escape Titanium LJ6T- 10849-JLA for a Hybrid Looks amazing. Very happy with it. I do have a DTC that I can’t clear U0100:00-0A. I’m wondering if that’s causing the issue.

Hey Antonio, I have my cluster installed and working fairly well. Only have 3 drive modes as slippery isn’t listed in Forscan and other drive modes prevent me from cycling. Seemingly no other issues except I noticed that the summary screen at end of trip shows limited info. My previous...

Found this. Explains some of my issues.

Looks like the cluster doesn’t like any other modes than Normal, Eco or Sport. Tow and haul appeared to be the issue once removed I could transitions between drive modes. Sand is not the same as slippery and could be added but came up with a drive mode error. EDIT - Got slippery mode...

So I purchased a digital cluster after seeing Vtec87pr1 , Fast Mavericks and others on MTC had done it. I had to have it. So cool. I had Dave at Clusters by Livin it up program the odometer and add the as built for me. I hit the programmed mileage and installed today...

Get rid of any blind spots with one of these. Allows you to see 180 behind you without looking through headrests. $135 right now. WOLFBOX 12" 4K Rear View Mirror... https://www.amazon.com/dp/B0B1LLMCS9?ref=ppx_pop_mob_ap_share I bought the hardwire kit $21 WOLFBOX USB C Hardwire Kit for...

Thanks , I have the 4 pin. Had Dave from Livin it up program it for me. Shipped today will have this weekend. Once I hit the programmed km’s I’ll install. Fingers crossed. Did you have any issues changing mileage with Forscan?

Looking awesome

I’ll have my cluster next week. Any issues since installing it?

if you are familiar with Forscan you can disable the TPMS menu in the IPC module. Turn it back on when you change your tires.

Fast Mavericks, I’ve sent you a private message.

Confirmed. Just got this to work making changes in bdycm, DDM and PDM, without changing any values. Works great on locking vehicle. All windows close.