Search results

That’s easy to say if you’re not in the 1%, and you still have the use of the vehicle you bought. If it’s so well proven in previous products. . . .?

Not real happy either! And still not word from the dealer. But……not giving me a warm & fuzzy feeling about taking any long trips❗️

#2 MY BAD • 2022 Lariat EB, FX4, 4K, delivered 10/15/21 02/24/23 - Transmission Failure with 20k miles on odo Have injured left hand, in cast, making many mistakes, mentally & physically, especially while trying to type & compose at the same time. 😳

MY BAD • 2022 Lariat EB, FX4, 4K, delivered 10/15/21 02/24/22 - Transmission Failure with 20k miles on odo

2022 EB, FX4, 4K, delivered 10/15/22 02/24/22 - Transmission Failure with 20k miles on odo Clunk when placed in gear {D or R}. In D would not move when throttle first pressed, then lurched forward for a short distance, paused as if stalled, then would seem to reengage and continue on, shuffling...

2022 EB, delivered 10/15/22 02/24/22 - Transmission Failure with 20k miles on odo Clunk when placed in gear {D or R}. In D would not move when throttle first pressed, then lurched forward for a short distance, paused as if stalled, then would seem to reengage and continue on, shuffling...

You might also look at the thread below, it also has some info that might be of interest. <https://www.mavericktruckclub.com/forum/conversations/motorcycle-rear-tire-helper.1904/#convMessage-9149>

Would need to get with my fabricator and see if he would be interested in making the two pieces [load spreader plate and hitch carrier arm]. Not sure it would be cost effective to make just one and then pay the shipping cost to your location. I could supply the dimensions for a local fab shop...

Just noticed you are in CO, here is a photo of the Honda rig in SE CO, shortly after taking delivery of my new 2019 CB500X. Plus a couple of more photos of the spreader plate and hitch arm. Some of the work may look a bit ‘cobby’, but tried to use off the shelf items, and material I had on...

These are photos of the package fabricated for a 2017 Honda Ridgeline. The Maverick package is the same concept but all of the dimensions are different. Ramps needed to be shorter to fit in the bed with the tailgate closed, fortunately the Mav bed loading hight is about 6” lower which makes...

The ‘load spreader plate’ takes the bike load off of the tailgate and transfers it to the truck bed and trailer hitch. You probably won’t have a problem when the truck is not moving, but the rough condition of roads today concerned me with the jouncing load the tailgate would be subjected to...

You might want to check the 'Lets see those motorcycles/scooters in the bed pictures!, thread: <https://www.mavericktruckclub.com/forum/threads/lets-see-those-motorcycles-scooters-in-the-bed-pictures.6642/> Lots of good info there. Another thread along the same lines: 'A Motorcycle in the...

Prefer a solid mounting point for the winch and chock. Installed a permanent aluminum angle, winch/chock/ramp storage mount adaptor at the cab end of the bed. Used the existing tie down locations, with longer SS bolts to secure it and the original tie downs. Winch and chock mount to the...

WELL! . . . Might have saved me a lot of time and money just changing to a different type of bike! 😂

fordluvr44 the ‘load spreader plate’ takes the bike load off of the tailgate and transfers it to the truck bed and trailer hitch. You probably won’t have a problem when the truck is not moving, but the rough condition of roads today concerned me with the jouncing load the tailgate would be...

Need to access the area behind, and to the right side of the center info screen. (backside of the cubbyhole). Vehicle is a 2022 Mav with Lariat Lux options. Does anyone have info and/or experience in accessing this area. Need to get the top dash panel removed to gain entry to the area...

I ani't old, I'm just more experienced (78)! Got mine on 10/15/21, Lariat 2T, AWD, 4K, FX4, Cactus Grey, matches my hair. Have almost 10K on it so far, avg 26+ overall. Have seen 29.9 @ 75 on the interstate down toward the coast, in the mountains 27-28 at the same speed. Call it 'BB' my...

Thanks John, interested to know if details on removal/replacement of the dash trim is covered. If they are actually Ford shop documents, they should cover pretty much anything I’ll be wanting to do. . . hpdl

Thanks, bdaniel230. I monitor this, and several other threads for info. Now I need to find the info for removing the trim around the center screen. Want to get into the empty space on the right side of the screen. Think it would be a good place to mount a 'Ram' ball for mounting my...

You might want to check out this thread: My real truck can haul my motorcycles w/ help of custom metal tailgate support and level struts Thread starter BILLNOROVILLE Start date Jan 21, 2022 Watchers My CB500X loaded while in the hardware prototyping stage. Forward mounted wheel chock/winch...