Aftermarket Fender Flares Recommendations?

[Dr. Ron]

I have a 2023 Lariat and I would like to find fender flares that are not wide and are glossy, not mat finish. I have seen this on some Rangers but I have not found a place to find the specific thing I would like. Any help will be greatly appreciated!

Sponsored

 

[Hot Runr Guy]

This member had the Air Design flares painted to match by a local bodyshop.

https://www.mavericktruckclub.com/f...nder-flares-smoothed-and-color-matched.30208/

although they show them as glossy, the text indicates textured. https://www.airdesignusa.com/us/2021-2025-maverick-smooth-fender-flare-set.html

HRG

 

[Master Blaster]

I have the Rough Country flares with the bolt-on look as a dealer-installed option on my 23. They're about as wide as you can get.

 

[Dr. Ron]

I have the Rough Country flares with the bolt-on look as a dealer-installed option on my 23. They're about as wide as you can get.

Thank you, but I am looking for the thin ones not the wide.

 

[Master Blaster]

Thank you, but I am looking for the thin ones not the wide.

I think the Mabett ones are almost straight-up-and-down, so they do nothing to stop wheel spray or door hits in a parking lot.

 

[Dr. Ron]

I think the Mabett ones are almost straight-up-and-down, so they do nothing to stop wheel spray or door hits in a parking lot.

Thank you.

 

[Cocobean]

I have the Maxzina version which I found at a good price w discounts.
They fit perfectly; installed myself in just over an hour. I did use new retainer clips since I broke a few original ones.
The flares have a textured shiny finish which has grown on me…

 

[TrailMaster]

I think the Mabett ones are almost straight-up-and-down, so they do nothing to stop wheel spray or door hits in a parking lot.

Actually they do make a noticeable difference in reducing the amount of slop thrown across the doors and side panels. I know because I've done before/after install comparisons after driving in some deep slush last winter. Thankfully they haven't been tested for parking lot ding protection yet.

 

[maccobra]

Get the EGR flairs. They are split at the fender/ bumper seam and allow the bumper/grill to be removed without damaging the flairs. They’re also the best looking.

 

[KathyG]

I put on the Mabetts - and treated them with Ceracote trim treatment before installation which makes them shinier and blacker. I put the Ceracote on all exterior black plastic trim and grill - it has lasted at least 6 months looking really nice.
Note also that I put some PPF under the flare contact areas to protect the paint from abrasion - lots of comments seen on this -I think its a good idea.

 

[Dr. Ron]

Get the EGR flairs. They are split at the fender/ bumper seam and allow the bumper/grill to be removed without damaging the flairs. They’re also the best looking.

Thank you, I will take a look at them.

I put on the Mabetts - and treated them with Ceracote trim treatment before installation which makes them shinier and blacker. I put the Ceracote on all exterior black plastic trim and grill - it has lasted at least 6 months looking really nice.
Note also that I put some PPF under the flare contact areas to protect the paint from abrasion - lots of comments seen on this -I think its a good idea.

Two things: 1) Would you please post a photo of your Maverick with the flares installed? 2) What is PPF?

 

[Glen Baker LLC]

P= Paint
P= Protection
F= Film

 

[Dr. Ron]

P= Paint
P= Protection
F= Film

Thank you!

 

[Abel7847]

Any

I have the Rough Country flares with the bolt-on look as a dealer-installed option on my 23. They're about as wide as you can get.

Any pics how’s the fitment, I’m looking for the same one wish they had cactus grey PTM.

 

[Dr. Ron]

Any

Any pics how’s the fitment, I’m looking for the same one wish they had cactus grey PTM.

I need Cactus Grey as well.

Sponsored