Cubby phone holder 3D print - modified for regular iPhone size

[bartflossom]

I'm in Florida and worried about PetG in the car melting I found a few upgrades that I wanted to print but I was going to do ASA. So two part question 1 how long have you had the upgrades in the car? and two any issues?

ASA would probably be the perfect filament, but petg is way easier to print and doesn't release fumes. I've only just printed this yesterday but with several 100 degree days coming up here in north Texas, it won't take me long to see how it holds up. I'll report back this weekend.

Sponsored

 

[Brad3D]

What filament did you use on this?

I did not make this, BUT for ease of printing and use if you have a 3D printer PETG will be the easiest filament with higher temp and UV resistance. You could also always print in PETG and then paint it for some more UV protection. Also print with at least 4 walls in your perimeter and a decent % infill.

If you print with PLA or PLA+ it will only take a few hot days to warp bend and then fail.

 

[Gfyfocus]

I have

I did not make this, BUT for ease of printing and use if you have a 3D printer PETG will be the easiest filament with higher temp and UV resistance. You could also always print in PETG and then paint it for some more UV protection. Also print with at least 4 walls in your perimeter and a decent % infill.

If you print with PLA or PLA+ it will only take a few hot days to warp bend and then fail.

I have a printer and can print in petg. I am just debating do I pay a buddy to print some things in Asa for me or do I risk petg

 

[Bohefus]

Good question. I like it mainly because I get notifications on the phone that don't show up in carplay, like myQ garage door or Ring cameras. Also I'm hard of hearing and can't always understand when Siri reads a text. When that happens I can bring it up on the phone.

I just did some experimenting in the driveway, and found you can control your music without taking navigation off the screen, and while it won't show two nav programs at once, it will put turn by turn on the phone.

But yeah, for most people it's probably just needless duplication, or just a nice place to charge your phone.

Nice explanation! I have a cubby filler Magsafe phone holder on my Raptor Mav

 

[bartflossom]

Nice explanation! I have a cubby filler Magsafe phone holder on my Raptor Mav

Oh wow! I love that holder. Please share where you got it.

 

[Gfyfocus]

Nice explanation! I have a cubby filler Magsafe phone holder on my Raptor Mav


id also like to know where you got that

 

[bartflossom]

Well, I have too much time on my hands and just went ahead and dove down a google rabbit hole and came up with this. I've already ordered them. If it works and holds up to the heat ok, I'll make another thread about it.

Thanks for the pic Bohefus!

cubby grid revised: https://www.amazon.com/dp/B0CGDJ52QK?smid=A34IZUFDDHSU40&ref_=chk_typ_imgToDp&th=1


magsafe holder: https://www.amazon.com/dp/B0CQPJKXVD?smid=A3ISN3IGK0NJQ9&ref_=chk_typ_imgToDp&th=1

 

[Gfyfocus]

i found a cubby accessory i want but the Etsy shop isn't taking messages and I suck at modeling so idk if its going to work for my car or not

 

[Bohefus]

Oh wow! I love that holder. Please share where you got it.

Here's the holder &
Cubby insert

 

[bartflossom]

i found a cubby accessory i want but the Etsy shop isn't taking messages and I suck at modeling so idk if its going to work for my car or not

If it's for a maverick cubby, it'll work on any maverick. The cubby doesn't change for 2022-2024

 

[Gfyfocus]

If it's for a maverick cubby, it'll work on any maverick. The cubby doesn't change for 2022-2024

No it's not that, I need to know the material it is printed in and the etsy shop won't respond to my messages.

 

[bartflossom]

Well I just found another cubby grid that is injection molded and heat proof. Guess I'll cancel the first one and order this. https://www.amazon.com/dp/B0CGDJ52QK?smid=A34IZUFDDHSU40&ref_=chk_typ_imgToDp&th=1

 

[Rojo]

ASA would probably be the perfect filament, but petg is way easier to print and doesn't release fumes. I've only just printed this yesterday but with several 100 degree days coming up here in north Texas, it won't take me long to see how it holds up. I'll report back this weekend.

I'm right next door in Louisiana and have had some PLA parts in the truck for a few weeks and everything is holding together so far. We will see once August hits.

 

[rmhopper]

I have

I have a printer and can print in petg. I am just debating do I pay a buddy to print some things in Asa for me or do I risk petg

I have printed many things for car interiors in PETG and never had a melting failure (more than a few abuse failures though).

 

[Gfyfocus]

I have printed many things for car interiors in PETG and never had a melting failure (more than a few abuse failures though).

I am in Florida, It is 5:25pm 90 degrees Fahrenheit with a real feel of 115 and a humidity of 84% i don't want to risk petg

Sponsored