22 XL Lobo St Paddle shifters ,f150 Fog light Switch and Fog lights, Rotiforms Wheels Scale Suspension lowered and much more Oem Ford Accesories.

[Vtec87pr1]

Sponsored

 

[Johnny0625]

Right on man!! That's flippin awesome, well done!!

 

[Texasdevild]

Im proud to announce it works added to 2 terminals on the bcm conector and got power coming out of them with 12 volts ....

Now need to send 2 wires to the front bumper and finish installing the fog lamps some day lol . Things you also need to enable for the fog lamps to work are in the pictures. You need to enable left and right fog lamp usage and put it on fog only .

I pull the pins from and Ford o2 Sensor i will try to find the pins from ford parts and give you guys the link.

Do you have a p/n for this connector or the pins inside of it?

 

[Vtec87pr1]

Do you have a p/n for this connector or the pins inside of it?

https://www.mavericktruckclub.com/f...led-in-maverick-diy.26541/page-10#post-717579

In this page i belive i added the terminals part number

 

[Texasdevild]

https://www.mavericktruckclub.com/f...led-in-maverick-diy.26541/page-10#post-717579

In this page i belive i added the terminals part number

Thanks! Going to order these today and hopefully get my fog lights finally completed.

 

[Automan21]

Vtec you are the man, well done sir. Keep up the good work.

 

[Automan21]

Hey Vtec is the part number for the engine cover by any chance happen to be K2GZ-6A949-B

 

[Vtec87pr1]

Hey Vtec is the part number for the engine cover by any chance happen to be K2GZ-6A949-B

Yes thats the lincon i bought it from .

 

[Vtec87pr1]

jum should i?

power seat and heated ?

 

[Mabcim]

jum should i?

power seat and heated ?

Why not? Cannot be much harder than the other wiring you have done.
Should be able to get just the heat elements and add them; just have to deal with getting seat covers off and on, but should be plenty of YouTube videos for that.

 

[volksnuts]

What seats are you thinking of using?

 

[The Cyber Orange Guy.]

You're making me regret getting a xlt luxury, soon your XL gotta get more equipped than a lariat.lol

I still thinking on warranty and trade in, but as soon i wrap my mind if i gonna keep it or not i might jump on few of your projects.

You're really killing it, great job.

Can I make a special request ?

How to to install and and activate the proximity sensor keyless entry and push button just like the lariat does, that's my biggest complaint about my Mav.

 

[volksnuts]

You're making me regret getting a xlt luxury, soon your XL gotta get more equipped than a lariat.lol

I still thinking on warranty and trade in, but as soon i wrap my mind if i gonna keep it or not i might jump on few of your projects.

You're really killing it, great job.

Can I make a special request ?

How to to install and and activate the proximity sensor keyless entry and push button just like the lariat does, that's my biggest complaint about my Mav.

Parts won’t be cheap

 

[Vtec87pr1]

Why not? Cannot be much harder than the other wiring you have done.
Should be able to get just the heat elements and add them; just have to deal with getting seat covers off and on, but should be plenty of YouTube videos for that.

I bought a seat lol i just haven't been able to install it yet. @Fast Mavericks gave me the idea. Might try to do it tomorrow after work.

Kind of dirty need to get it clean and take it apart . The wiring probably should be simple but since mine an XL will need to add wires and enable it on forscan will see.

 

[Mabcim]

I bought a seat lol i just haven't been able to install it yet. @Fast Mavericks gave me the idea. Might try to do it tomorrow after work.

Kind of dirty need to get it clean and take it apart . The wiring probably should be simple but since mine an XL will need to add wires and enable it on forscan will see.

What is it out off? Is the flo pan bolt pattern the same? Or will you have swap with the ones from your seat?

Sponsored