fender flares recommendations?

[Shell]

purchased mobett fender flaries for 24 4x4 gas maverick Lariat, they do not fit. any suggestions on what ones do fit.

Sponsored

 

[Glen Baker LLC]

Ronnie,
Please explain the trouble you're having with the fitment.

 

[Random881]

They should be universal between all years? Are you just having trouble getting the holes lined up? Truth be told, if all else fails you can just send a direct message to @MABETT and he'll help you.

 

[Shell]

thet are not long enough, align front holes and by door it stops a foot short of getting to black molding on truck.

 

[Daverick]

The front and rear flares aren't the same length. If the one you're trying with is too short have you tried the longer one?

Otherwise maybe they shipped you a faulty kit, idk.

 

[Hot Runr Guy]

thet are not long enough, align front holes and by door it stops a foot short of getting to black molding on truck.

A picture would really help,,,,,,,

HRG

 

[Glen Baker LLC]

thet are not long enough, align front holes and by door it stops a foot short of getting to black molding on truck.

Ronnie, @Shell
They are Universal throughout the years for all Mavericks.
The front and the rears are of different lengths.
When installing. Line up the hole at the top of your wheel well.
Then alternate attachment holes, working top down front and rear.
If you start at the Top/ Center fastener and alternate towards the ends, they should fit perfectly.
Too many folks make the mistake of starting at one end or the other.

PSA: I realize not many folks have experience changing a tire.
When installing and tightening lug nuts or bolts. You always alternate.

 

[MABETT]

Hey Ronnie

PM Send, Let me see what happend.

 

[Cancunbadlands]

purchased mobett fender flaries for 24 4x4 gas maverick Lariat, they do not fit. any suggestions on what ones do fit.

2024 Lariat Tremor
@MABETT wheel fender flares fit like a glove
Zero nada no issues

 

[Hot Runr Guy]

2024 Lariat Tremor
@MABETT wheel fender flares fit like a glove
Zero nada no issues

He's lurking, but not responding.

HRG

 

[Shell]

I understand what I am being told, but on my front flares in picture above the flare should go from bottom molding on truck front and rear, the ones I got go from front molding on truck but end about 12 inches from molding short. I have returned them.

 

[Shell]

dang should I be brave and order again, maybe they just sent wrong one's

 

[Glen Baker LLC]

I understand what I am being told, but on my front flares in picture above the flare should go from bottom molding on truck front and rear, the ones I got go from front molding on truck but end about 12 inches from molding short. I have returned them.

Ronnie,
I realize you already returned them. Pictures would have been handy.
I can't imagine them being 12 in short. That's a lot.

 

[Cancunbadlands]

He's lurking, but not responding.

HRG

A ghost

Sponsored