Escape or Focus 17" wheels ?

[bglinks]

I'm looking to change out my 2026 17" XLT wheels. An Ebay search showed that several Ford Focus or Escape wheels would fit. Is that true ? Do they need spacers or anything ? Thanks.

Sponsored

 

[Cancunbadlands]

They'll fit for sure and the Bronco Sport wheels as well (Ford Edge and Taurus)

108mm bolt pattern and a 63.4 mm center bore, using M14 x 1.5 thread-pitch lug nuts

 

[bglinks]

They'll fit for sure and the Bronco Sport wheels as well (Ford Edge and Taurus)

108mm bolt pattern and a 63.4 mm center bore, using M14 x 1.5 thread-pitch lug nuts

Fantastic, thanks for the help.

 

[Darnon]

(Ford Edge and Taurus)

Only Edge 2015+ (earlier are 4.25"). And NA Tauruses never used 108mm, only Chinese-produced models that are sold as Taurus in the middle east. You might be thinking of second gen Fusions.

 

[Hot Runr Guy]

They'll fit for sure and the Bronco Sport wheels as well (Ford Edge and Taurus)

108mm bolt pattern and a 63.4 mm center bore, using M14 x 1.5 thread-pitch lug nuts

1 thing to keep in mind, while the bolt pattern and center hole may be the same, most of the Escape/Edge/Fusion wheels I look at have a greater offset (50+) than the Mavericks' 37.5, so they will tend to be "inset" more.

https://www.factorywheelreplacement...bSnfHbfVU3Z7Xx-QTGOHFlt-BpHBK5LBoC_KYQAvD_BwE

HRG

 

[F100Lobo]

Focus wheels have the same blot pattern but the hole diameter is smaller.

 

[bglinks]

Again, big thanks to all. This is starting to get a little more complex than I hoped, but I'm still working on it. I would like to keep the set up as close to stock as possible.

 

[Dad]

Again, big thanks to all. This is starting to get a little more complex than I hoped, but I'm still working on it. I would like to keep the set up as close to stock as possible.

That tends to happen, doesn't it.

 

[bglinks]

Amen.

Sponsored