Replace push button start with one that has a light indicator?

[AndrewinMD]

Anyone know if it's possible to replace the standard push button start with one from another model, like my old Fusion had, that has an indicator light? Seems like it should be possible, as I would imagine that the connection behind it is fairly standard to Ford vehicles. I found some replacement ones for the Fusion, but I have no idea how to determine what would work in the Maverick.

It's obviously not a life-changing event, but since my 6 yr old car had it, the Maverick's plain-Jane one seems a little...cheap. Thanks in advance.

Sponsored

 

[Edw]

Just curious, I have never replaced that, so I'm curious about how it looks?

 

[22CarbGMav]

Anyone know if it's possible to replace the standard push button start with one from another model, like my old Fusion had, that has an indicator light? Seems like it should be possible, as I would imagine that the connection behind it is fairly standard to Ford vehicles. I found some replacement ones for the Fusion, but I have no idea how to determine what would work in the Maverick.

It's obviously not a life-changing event, but since my 6 yr old car had it, the Maverick's plain-Jane one seems a little...cheap. Thanks in advance.

Hey I was actually raised in Forest Hill, MD! Nice to see someone local! I'm curious about this too. If you find out that it is possible, let me know!

 

[AndrewinMD]

Just curious, I have never replaced that, so I'm curious about how it looks?

Here's a photo I found. https://www.cargurus.com/Cars/Discussion-t82877_ds970019

 

[Mabcim]

It will be a more a question of whether the wiring has the extra wire for the light. I would suspect the connector would be compatible.

I would be better to see if Bronco Sport or Escape have a lighted one.

 

[AndrewinMD]

It will be a more a question of whether the wiring has the extra wire for the light. I would suspect the connector would be compatible.

I would be better to see if Bronco Sport or Escape have a lighted one.

There are a bunch of aftermarket options from what I found in a search the other day, but that market hasn't caught up to the Maverick yet. I'm leery about ordering one without knowing about compatibility, and I need to learn how the replacement process would be before I commit. I assume it's not too complicated, but with my luck, I'd wind up removing the dash.

 

[Mabcim]

There are a bunch of aftermarket options from what I found in a search the other day, but that market hasn't caught up to the Maverick yet. I'm leery about ordering one without knowing about compatibility, and I need to learn how the replacement process would be before I commit. I assume it's not too complicated, but with my luck, I'd wind up removing the dash.

I had the console put the other day. I didn’t see any bolts for that panel (push button, rear window switch, USB). That panel might just pull off. Looking at a Ford part site, should shed light on how that comes out.

 

[22CarbGMav]

Yeah I replaced my HVAC control module with one with the LCD screens on the temp knobs since my truck missed the cutoff for production with the screens. It was the whole piece that housed the AC control module and the two vents immediately above it that was connected via 5 clips. I'm sure the trim piece below it is just held in place with clips as well. Then the USB, rear window, and push start buttons are probably just plugged into a wiring harness back there.

Might be able to find a replacement from a Titanium Escape maybe has a lighted On/OFF button?

 

[Dallas Maverick]

Anyone know if it's possible to replace the standard push button start with one from another model, like my old Fusion had, that has an indicator light? Seems like it should be possible, as I would imagine that the connection behind it is fairly standard to Ford vehicles. I found some replacement ones for the Fusion, but I have no idea how to determine what would work in the Maverick.

It's obviously not a life-changing event, but since my 6 yr old car had it, the Maverick's plain-Jane one seems a little...cheap. Thanks in advance.

I completely agree with you on the plain Jane look. I also don’t like the fact that the button is concave…it just makes it harder to push.
Just yesterday I ordered a new push button from the Lincoln Corsair. That one is all chrome, lights up, and bulges out instead of in. I think the chrome will match the other chrome accents in my truck. The dealer said it would take a week to get in, so I guess I’ll update next week!

 

[Nw_adventure]

I completely agree with you on the plain Jane look. I also don’t like the fact that the button is concave…it just makes it harder to push.
Just yesterday I ordered a new push button from the Lincoln Corsair. That one is all chrome, lights up, and bulges out instead of in. I think the chrome will match the other chrome accents in my truck. The dealer said it would take a week to get in, so I guess I’ll update next week!

Your push button definently wont be hard to find anymore/lol- Hope it works- I would like a lighted option as well-

 

[22CarbGMav]

My stock Lariat push start button does light up…

 

[Mabcim]

My stock Lariat push start button does light up…

OP is talking about the small light that comes on when the vehicle is started. Lit up even during the day.

 

[Dallas Maverick]

Your push button definently wont be hard to find anymore/lol- Hope it works- I would like a lighted option as well-

So...
I called the dealership and they told me that my part was in. Picked it up on my lunch break. At first glance, it looks like its' gonna work great and I was really excited. Come to find out, the plugs on the back do not match, which is a bummer.

So, a question for the group...
Do I beat it to fit, or do I return it and pursue another option?

 

[Dallas Maverick]

As a follow up,

I spent a few minutes looking at other push button options.

What it looks like to me is that the connection on the Maverick is atypical. Maybe it's a newer connection, but it looks like its only shared with the Bronco. Most of the other vehicles are using a different plug shape.

Bronco

F-150

Escape/Bronco Sport '21

 

[AndrewinMD]

Definitely looks like it matches the Bronco. I did see some aftermarket buttons for the Bronco the other day, from what I remember. I'll do some digging again.

[edit] Found something that I didn't know -- the Bronco has BOTH a lighted and a non-lighted (that one looks identical to Maverick) switch. Does someone know where to find the OEM part that's lighted? I'm trying but not very skilled in navigating the Ford parts site(s).

Sponsored