Removing 4th key

[fustilarmik]

I've been a long-time lurker in the Forum and have picked up a lot of useful knowledge about my 2024 XL, but this is my first thread.

My wife is a fan of the Flip-key fob and I am not, so I had two plastic-headed "dumb" keys cut and I programmed them myself using these excellent instructions. So now I've filled up the 4-key quota and can't add any more.

Recently, one of my Flip-key fobs was severely damaged. The metal key is fine and the truck recognizes the fob when the key is inserted, but the lock/unlock/panic buttons are non-functional.

I purchased a replacement Flip-key fob and can migrate the cut metal key into the new Flip-key fob, but need to remove this 4th key from the truck so I can go through the process of adding my new Flip-key fob. I do not use Forscan, but would consider it if that's the solution.

How do I remove this 4th key so I can add another?

Sponsored

 

[HeyBales]

There is a Forscan video out there on Ford's and removing one of the slots - to do your own programming.

Or dealer or competent locksmith - both may be close in price anyway.
Bring all the keys.

 

[Rogue]

You may also be able to replace the chip in the new key fob with the chip in the old key fob. I successfully used that trick between two plastic key fobs.

Sponsored