Passenger side wiper blade

[gp1200x]

Mine was parking too high up. I removed the wiper arm and moved it downward a bit and now it parks perfectly. It was bugging me because from inside I could see the wiper when turned off, now it's "hidden".

Note: I removed the arm (with the hood open). I had to use a wiper arm removal tool as I could not get it free without the tool, even with some prying against a wood block.

Thanks for the tip...I was wondering if a puller was needed since some arms are really on tight and you can scratch paint trying to remove them. I suspect the arm head is notched..correct?

Sponsored

 

[Milous]

I suspect the arm head is notched..correct?

Yes.

 

[Suzukiridr14]

I noticed that the passenger side wiper blade presses into the plasticy, rubbery trim piece at the bottom of the windshield. It actually bows the wiper blade a little bit. Does anyone else notice this on their Maverick? The design is similar on my Bronco Sport but it does do this on it.

Here's the Maverick:

And here's the Bronco Sport:

All the Mavericks I've seen, have this same problem.

Sponsored