My Ford Maverick DIY Upgrades

[AGQ_MAVERICK]

Hi Guys,
Just want to share some upgrades on my XLT:

-Raptor Grille with amber and LED bars
-Tailgate assists
-led side blinkers
-EGR Fender Flare
-1.5" wheel spacers all around
-side mirror and door handle caps (ss)
-splash guard (front)-modified to fit EGR Flare
*For Full Video:

Sponsored

 

[clearviewx]

Front lights remind me of Knight Rider.

 

[GreenLady]

Hi Guys,
Just want to share some upgrades on my XLT:

-Raptor Grille with amber and LED bars
-Tailgate assists
-led side blinkers
-EGR Fender Flare
-1.5" wheel spacers all around
-side mirror and door handle caps (ss)
-splash guard (front)-modified to fit EGR Flare
*For Full Video:

Very sharp! I like your skull caps. I did black carbon fiber on my 22 but might do these on my 23.

 

[am_fm_radio]

The 1st thing I add to all my vehicles is a K&N air filter.. I put one on my 2002 GMC 2500HD duramax when it had about 100 miles. Well, 20 years later the rubber molded frame was cracking and I emailed K&N with pictures and said "lifetime guarantee baby".. They sent me a new one in a week.. THe K&N is cheeper than dealer replacement filter.. Especially on my Mercedes.. Both on the GMC Duramax and the Mercedes, I get 1 mpg better mileage.. Clean them 2 times a year. I'm not big on aftermarket bling.. Also had one on a E-350 Ford motor home and it did better gas wise..

Chrome won't get you home..

 

[Hac411]

Hi Guys,
Just want to share some upgrades on my XLT:

-Raptor Grille with amber and LED bars
-Tailgate assists
-led side blinkers
-EGR Fender Flare
-1.5" wheel spacers all around
-side mirror and door handle caps (ss)
-splash guard (front)-modified to fit EGR Flare
*For Full Video:

I got fenders too but my tires look too sunken in. Where did you get your spacers and we’re the hard to install?

 

[AGQ_MAVERICK]

I got fenders too but my tires look too sunken in. Where did you get your spacers and we’re the hard to install?

Supreme Suspensions, 1.5" all around with no rubbing...easy to install, make sure to use thread locker.

 

[Mike215]

Same lugnuts with spacers?

 

[AngeloInSC]

Is that a stock Raptor grill? How tough was it to get it to fit the Mav?

 

[Dmat]

Is that a stock Raptor grill? How tough was it to get it to fit the Mav?

there is an aftermarket grill meant to look like the raptor one. it should be a direct fit.

 

[Red Hot Maverick]

Engine cover....where did your get it? Part number

 

[Hac411]

Where did you buy it?

Supreme Suspensions, 1.5" all around with no rubbing...easy to install, make sure to use thread locker.

t

 

[AngeloInSC]

Hi Guys,
Just want to share some upgrades on my XLT:

-Raptor Grille with amber and LED bars
-Tailgate assists
-led side blinkers
-EGR Fender Flare
-1.5" wheel spacers all around
-side mirror and door handle caps (ss)
-splash guard (front)-modified to fit EGR Flare
*For Full Video:

I'm assuming you didn't have ACC (Adaptive Cruise Control) on your Mav. I'm thinking this won't work with ACC.

 

[groovesocket]

Hi Guys,
Just want to share some upgrades on my XLT:

-Raptor Grille with amber and LED bars
-Tailgate assists
-led side blinkers
-EGR Fender Flare
-1.5" wheel spacers all around
-side mirror and door handle caps (ss)
-splash guard (front)-modified to fit EGR Flare
*For Full Video:

Your mods look good. You made no mention of your red brake calipers. Please provide details and pics. Painted? Powder coated? Caps? DIY?

 

[AGQ_MAVERICK]

Your mods look good. You made no mention of your red brake calipers. Please provide details and pics. Painted? Powder coated? Caps? DIY?

I painted the caliper with brush. Caps, got it from Aliexpress.

 

[AGQ_MAVERICK]

Same lugnuts with spacers?

Yes, no trimming required, stick with with 1.5" up and you should be fine. no rubbing on fender.

Sponsored