- First Name
- Tim
- Joined
- Jul 10, 2021
- Threads
- 155
- Messages
- 2,354
- Reaction score
- 8,505
- Location
- Salina, KS
- Website
- www.long-mcarthur.com
- Vehicle(s)
- 2022 F-150 Lightning, 2021 Ford Bronco
- Engine
- Undecided
- Thread starter
- #1
Sponsored
Sponsored
Maverick's Modular Drop-in Bedliner: What You Need to Know
- Thread starter fordvideoguy
- Start date
- Watchers 4
- First Name
- Steve
- Joined
- Nov 9, 2023
- Threads
- 9
- Messages
- 653
- Reaction score
- 1,095
- Location
- Elbridge New York
- Vehicle(s)
- 2023 Maverick XLT 4K, 2025 Ranger STX 7.5K
- Engine
- 2.0L EcoBoost
No noise from mine. I plan on leaving the sides, front panel and gate panel and replacing just the actual bed floor panel with a rubber type floor only liner that can pull out.
Last edited:
- Joined
- Nov 5, 2021
- Threads
- 20
- Messages
- 3,848
- Reaction score
- 6,017
- Location
- British Columbia, Canada
- Vehicle(s)
- 2022 XLT Maverick Hybrid
- Engine
- 2.5L Hybrid
I guess one of these days I should pull mine off and clean under it. It's a pain to take off the sliding cargo management system though.
- Joined
- Apr 10, 2022
- Threads
- 29
- Messages
- 645
- Reaction score
- 921
- Location
- California
- Vehicle(s)
- 1997 Ford F250HD 4x4
- Engine
- 2.0L EcoBoost
I completed the opposite of this experience last weekend.
My son's 23 XLT Hybrid doesn't have a bed liner. I bought a DIBL someone advertised on the SoCal Mavericks MTC forum, and I installed it on his Maverick this past weekend.
I helped the seller remove the DIBL, which helped make the installation straightforward.
I noticed the DIBL I purchased didn't have the holes cut out in the side panels for the cleats closest to the cab. Thus, I cut holes in both side panels before installing the sides.
My son's 23 XLT Hybrid doesn't have a bed liner. I bought a DIBL someone advertised on the SoCal Mavericks MTC forum, and I installed it on his Maverick this past weekend.
I helped the seller remove the DIBL, which helped make the installation straightforward.
I noticed the DIBL I purchased didn't have the holes cut out in the side panels for the cleats closest to the cab. Thus, I cut holes in both side panels before installing the sides.
Sponsored
