Headlamp startup config error message in ForScan

[Two r’s]

Hey all,

I have a 24 Hybrib XLT. I am trying to adjust the "Headlamp position at ignition on" setting in Bdycm configuration mod.
I have tried 3 times to change from the factory setting of Auto to Last known.

The error message I get on ForScan is "Writing blocks failed - incompatible configuration" and this error appears at the 60% mark of the progress bar. No change happens.
I have made a couple of other changes that "worked", so I know the program is working and so is the obd2 connector I am using. That all checks out.

I always turn my light switch counter clockwise from "Auto" to parking lights or DRL when I start the vehicle, so I want to save the ware and tare on the switch and simply have the vehicle remember the last lighting position I used.

What configuration am I missing???

Thanks much.....any help appreciated
.

Sponsored