Focus RS Brembo BBK Combatibility

[E34less]

I can't be the only person that has wondered about the compatibility of this kit with the Maverick front end. Especially for those of you already squeezing more power out of the 2.0 motors. From some very surface level research on the Escape forums, it does look like the calipers and rotors will fit the previous generation, which I'm guessing is pretty similar to the current car from a suspension standpoint. The included brake lines are apparently an inch or so too short for that platform, though.

Links: https://www.cjponyparts.com/ford-pe...2lHdJrNN7ltA7ftAbMu0D8-Cph89h-nBoCx9EQAvD_BwE

https://www.fordescape.org/threads/focus-rs-brake-conversion-write-up.107706/

Sponsored

 

[DavesMav]

I believe @kingranchero already determined that Focus RS brakes will not bolt up. I'd trust his guidance He did hint at a Mach-E swap though...

Pics: 2022 Maverick Aftermarket Measuring Session at SEMA Garage | Page 2 | MaverickTruckClub

 

[E34less]

Good find. I didn't even see that thread in my research. I guess I shouldn't be surprised they went for parts commonality with a beefier car, but that RS kit would've been such a great bang for your buck upgrade.

 

[2016BoostedGreyGoose]

I'm working on the Focus RS front BBK upgrade for the Maverick. It will happen.

 

[Vtec87pr1]

i will look on fiesta brembo brakes since the suspension looks like ford fiesta lol

 

[MAV-UTE]

I'm working on the Focus RS front BBK upgrade for the Maverick. It will happen.

I know it's been a while, but any updates/pics of the brake set-up?!
Thanks

 

[NoVaJimmy]

I know it's been a while, but any updates/pics of the brake set-up?!
Thanks

The Maverick has an interesting brake setup, larger rotors and beefier calipers than anything else on the C2 platform that I'm aware of. You would think at the very least bronco sport brakes would be a plug and play swap but they're not. It's part of the reason why bronco sport owners can go with a 16" wheel and tire package but they will not fit on the Maverick.

 

[Vtec87pr1]

Damn im trying to check the specs of the rotors to see if i can find a match so i can put some cross drill rotors . But cant find nothing for them the only thing i found was ebc brake pads lol

Sponsored