Cubby phone holder 3D print - modified for regular iPhone size

[rclee]

Do I need to download both files and have them printed? I downloaded the file you modified and it looks like it is just the tray.

This will be the first thing I have ever considered printing. I found out our public library just bought 5 new 3d printers. They charge .10 cents per gram.

I just had those files printed from our local library. I did them in a translucent blue PETg filiment and they look great. My presonal phone is an iPhone 12 with a clear case and it fits very good and Thank You. By any chance could you modify the tray file for an iPhone 15 Pro ( My work phone) with a clear case like you did with the 12? The barely 15 fits in the slot but it is extremely tight.

If you can that would be great.

Sponsored

 

[rclee]

I just had those files printed from our local library. I did them in a translucent blue PETg filiment and they look great. My presonal phone is an iPhone 12 with a clear case and it fits very good and Thank You. By any chance could you modify the tray file for an iPhone 15 Pro ( My work phone) with a clear case like you did with the 12? The barely 15 fits in the slot but it is extremely tight.

If you can that would be great.

Thank You @bartflossom

 

[bartflossom]

I just had those files printed from our local library. I did them in a translucent blue PETg filiment and they look great. My presonal phone is an iPhone 12 with a clear case and it fits very good and Thank You. By any chance could you modify the tray file for an iPhone 15 Pro ( My work phone) with a clear case like you did with the 12? The barely 15 fits in the slot but it is extremely tight.

If you can that would be great.

I will find a minute and do that. Crazy weekend for me so probably Monday. I'll look up the 15 dimensions.

 

[rclee]

I will find a minute and do that. Crazy weekend for me so probably Monday. I'll look up the 15 dimensions.

I really appreciate that Hal. Thanks again!

 

[enthusiast_bttf]

I would also be interested in a size for the iphone 15 in a basic case, I was trying to mess with resizing but its not my skillset

 

[Codycote]

Thank you! My husband downloaded the STL and will be printing one shortly.

 

[swerver15]

This is what mine looks like after a couple months of heat, polymaker petg.

 

[bartflossom]

Ouch swerver15! That does not look good. Looks like something tougher than petg is needed. I'm probably going to try out the amazon injection molded grid type cubby insert linked here with the mag holder linked here . I'll post how it works out. Thanks again to bohefus

For rclee and enthusiast, I'll try and link a new file below for the tray that I made just a scoshe wider and thicker. If the link doesn't work pm me and we'll figure another way to get it to you.

stl file

If it's still not big enough, you might want to try the original tray design here.

 

[rclee]

Ouch swerver15! That does not look good. Looks like something tougher than petg is needed. I'm probably going to try out the amazon injection molded grid type cubby insert linked here with the mag holder linked here . I'll post how it works out.

For rclee and enthusiast, I'll try and link a new file below for the tray that I made just a scoshe wider and thicker. If the link doesn't work pm me and we'll figure another way to get it to you.

stl file

If it's still not big enough, you might want to try the original tray design here.

Thank You Hal, I did print both trays (the one you modified for a 12 and the original tray) The original tray is way bigger than either the iPhone12 or the iPhone15 by about 10 mm. I printed both because, I did not know which tray was yours.

Your modded tray is right on as far as width but the gap for the height needs to be wider for the iPhone15 by about 1-2 mm.

I will try the new file you linked. Thanks again. I will let you know if it fits.

 

[bartflossom]

Thank You Hal, I did print both trays (the one you modified for a 12 and the original tray) The original tray is way bigger than either the iPhone12 or the iPhone15 by about 10 mm. I printed both because, I did not know which tray was yours.

Your modded tray is right on as far as width but the gap for the height needs to be wider for the iPhone15 by about 1-2 mm.

So are you able to download the one I just linked? I made it a mm wider and thicker.

 

[rclee]

So are you able to download the one I just linked? I made it a mm wider and thicker.

Yes I just did it. I will take it to the library and print it.

 

[enthusiast_bttf]

Ouch swerver15! That does not look good. Looks like something tougher than petg is needed. I'm probably going to try out the amazon injection molded grid type cubby insert linked here with the mag holder linked here . I'll post how it works out. Thanks again to bohefus

For rclee and enthusiast, I'll try and link a new file below for the tray that I made just a scoshe wider and thicker. If the link doesn't work pm me and we'll figure another way to get it to you.

stl file

If it's still not big enough, you might want to try the original tray design here.

THANK YOU SO MUCH!!! PERFECT FIT !!!

 

[rclee]

I agree with @enthusiast_bttf It fits really good! Thanks again @bartflossom!

Thank you for your time.

Rob

 

[Codestar7]

original design https://www.thingiverse.com/thing:6369017

my remixed design https://www.thingiverse.com/thing:6674794

I like this one because there is no fits slot on front and includes ball joint for phone tray. I cut the original phone tray down to work with my old iphone 12 with or without a tpu case. Velcro required for secure seating of cubby piece.

Please forgive my wife's woefully unorganized iphone screen.

Do you have one to fit an iphone 16 pro? In red? Or what ever color the rest of those trays are.

Sponsored