Cruise control aftermarket options?

[Kdog04oc]

I see only the rostra is available.
But it's like $300 for the part and looks intrusive to install. Or the stock module, but taking off the steering wheel looks problematic.
Any other options out there?

Sponsored

 

[NoVaJimmy]

I see only the rostra is available.
But it's like $300 for the part and looks intrusive to install. Or the stock module, but taking off the steering wheel looks problematic.
Any other options out there?

You don't have to remove the steering wheel to install factory cruise, you just need to remove the airbag which is super easy. Just go with the factory switches, it's a lot easier than you're thinking. There are also plenty of videos on youtube documenting the install

 

[710-oil-614]

You don't have to remove the steering wheel to install factory cruise, you just need to remove the airbag which is super easy. Just go with the factory switches, it's a lot easier than you're thinking. There are also plenty of videos on youtube documenting the install

This is the answer. So much documentation and youtube videos out there. You want the factory switch gear for it, and to enable the graphics on your driver information screen.

 

[uga]

The oem factory switches are the only way to go. Perhaps a member close to you can help.

 

[catinthebathtub]

@Kdog04oc i bought the factory ford switches and the full edition of the Forscan software to enable them and was out less than $75 for everything. i followed a post on this forum and total install time was less than an hour.

Sponsored