Clogged windshield sprayer replacement

[voldpeece]

Happy Friday!

Thought I'd share info about windshield sprayers I got to replace the clogged ones. They are super cheap, fit well, easy DIY, and work great.

https://www.amazon.com/dp/B0C88RFQ6G?psc=1&ref=ppx_yo2ov_dt_b_product_details

Sponsored

 

[Dad]

Thanks for posting this helpful and time-saving information.

 

[shrek]

Happy Friday!

Thought I'd share info about windshield sprayers I got to replace the clogged ones. They are super cheap, fit well, easy DIY, and work great.

https://www.amazon.com/dp/B0C88RFQ6G?psc=1&ref=ppx_yo2ov_dt_b_product_details

How did you get the hoses from the washer pump off the spray nozzles? I would love to know that. I need to do the same thing. but I cannot get the hose off.
Please, Please let me know.

Thank you in advance!

 

[voldpeece]

Check out this video. It's not a Maverick but the process to remove the spray nozzles is same. Have fun!

 

[Montana]

I miss the kinds you could aim. I'm too lazy to look for a set right now, but if they made them for the Maverick I'd buy them.

 

[shrek]

Check out this video. It's not a Maverick but the process to remove the spray nozzles is same. Have fun!

So Our Mavs dont have the nice quick disconnects (At least my 2024 Lariat doesn't) THey seem to be shrink sealed to the nozzles. I for the life of me cannot get them to disconnect from the hoses.

I guess I will have to cut them off and buy new hoses and redo the lines.

 

[shrek]

Check out this video. It's not a Maverick but the process to remove the spray nozzles is same. Have fun!

I was just being dumb. THe nozzle is not shrinked to the tube. It was easily removed. Thank you for the information!!!!!! Fixed my issue. Thank you again!

 

[voldpeece]

 

[MakinDoForNow]

So Our Mavs dont have the nice quick disconnects (At least my 2024 Lariat doesn't) THey seem to be shrink sealed to the nozzles. I for the life of me cannot get them to disconnect from the hoses.

I guess I will have to cut them off and buy new hoses and redo the lines.

Turn the little black band and they release then put new one into hose and turn the band back to lock it together.

 

[doug maverick]

getting the nozzles back into the hood is a bear. Maybe I'm doing it wrong, but I've yet to see any instructions or video of how to put them back. Mine are clogged, and I've ordered new FORD OEM parts to replace them. I did remove the old one to attempt to blow them out, but issue of just tiny output persists.

Any advice on how to get the nozzle back into place in the hood appreciated.

Sponsored