BOV Adaptor issue

[Stert23]

Boomba Racing BOV adaptor. It is not making any noise. I get a fluttering sound driving under full load. I get a faint whoosh sound every once in a while. Very faint.

Installed it twice making sure electrical connector is right, both gaskets are good on the adaptor, and that the stock bov piece is moving in and out smoothly.

Is there something else I can troubleshoot?

Sponsored

 

[MM Mav]

@Boomba Racing please read above and reply to OP

 

[Stert23]

I did talk to Boomba's chat....After I initially installed it and got no sound they had me double check the wires that clip to the top, the gaskets on the adaptor, and that the stock BOV valve moves in and out freely.

I checked all those things and reinstalled. This time I let the car warm up for a while, in case that made a difference, and took it for a longer test drive. I have an underpass near me to help listen as I go under it. And that is where I could hear the fluttering sound at higher RPM and WOT.

By the time I got back from that drive Boomba was closed for the day. I have this question submitted to them through their website, but thought someone else might have some insight.

Is there a chance my stock BOV has an issue? It seemed to drive fine before, although I have not gotten on it hard yet since the car only has about 500 miles.

Sponsored