Bed Mounting Plugs (What are they for?)

[Randy H.]

There are two black blank-off plugs in the bed, forward and aft of the fender wells on both sides. What are these for? I have not seen any accessory for these locations yet.

Sponsored

 

[FortyFiveNorthoods]

There are two black blank-off plugs in the bed, forward and aft of the fender wells on both sides. What are these for? I have not seen any accessory for these locations yet.

I've seen the TouchLink Bed lighting wired through here.

 

[brnpttmn]

I think those are pass-throughs for 12v accessory connections. Thought I saw them getting used on one of the videos, but this is the only thig I could find (at 2:10):



It also looks like there are holes tucked up under the ridge of the bed.

 

[PortlandME]

Has anyone confirmed the use of these? I’m looking into a tonneau cover with 1/2” drain tubes and am wondering if it’s safe to channel the water into these holes.

 

[ffjack15]

Has anyone confirmed the use of these? I’m looking into a tonneau cover with 1/2” drain tubes and am wondering if it’s safe to channel the water into these holes.

The one's on the front are used for the drain tubes.

 

[TSAINTS1115]

They are pre-drilled access holes for your use.

 

[TexasCoop]

Has anyone confirmed the use of these? I’m looking into a tonneau cover with 1/2” drain tubes and am wondering if it’s safe to channel the water into these holes.

Did you end up using those to drain water from a cover?

 

[Vongreg]

Has anyone confirmed the use of these? I’m looking into a tonneau cover with 1/2” drain tubes and am wondering if it’s safe to channel the water into these holes.

That’s what I did

 

[CaptBanana]

Sorry to revive the thread, but I'd figured I'd throw the part numbers for those plugs on here to help anyone that stumbles on this thread via online search looking for them:

- W715396-S300
- W718717-S300
- W703638-S300

Sponsored