aFe Momentum GT Intake | Overview and Install [VIDEO]

[Caleb@PandaMotorworks]

Check out our overview and installation video of the aFe Momentum GT Cold Air Intake System for the EcoBoost Ford Maverick!



aFe Momentum GT Cold Air Intake System (2022 Ford Maverick 2.0L Turbo)

​

Pro 5R

DETAILS:

• +16 HP / +18 lbs. x ft. Torque Max Gains
• Outflows Factory Intake by 11%
• Measured Flow: 316 CFM @ 7" H20
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Five Layer Performance Air Filter:
This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.

Dyno-Tuned Intake Tubes:
This system features high-quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Components:
Stainless steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.


Pro Dry S

DETAILS:

• +12 HP / +14 lbs. x ft. Torque Max Gains
• Outflows Factory Intake by 4%
• Measured Flow: 297 CFM @ 7" H20
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Innovative Filter-to-Housing Interface for Easy Installation
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Three Layer Performance Air Filter:
This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals

Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.

Dyno-Tuned Intake Tubes:
This system features high-quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Components:
Stainless steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Sponsored

 

[LSchicago]

If true that's a pretty large gain for just an air intake and filter.

 

[Vtec87pr1]

i think this one might be easier to install than the one i bought since uses 2 parts from the stock parts. very nice item

 

[Charles]

Way above my pay grade!

 

[MaverickResource]

say what? may have to look into this.

Going to be starting a major tremor build very soon. Watching

 

[NycGoose]

Have this installed just been forgetting to take pics works great! Saving up for a catted dp to pair with next…

 

[Caleb@PandaMotorworks]

Now on sale for 20% OFF!

Click the graphic below and use the code at checkout!

 

[Schteve]

does the intake need and / or a tune or just bolt on?

 

[Deleted member 30736]

No tune required, I'm setting the Maverick up before tuning it. I installed one this week.

 

[Superg0]

S&B intake or this?

 

[Deleted member 30736]

S&B intake or this?

Each has their fans. Note that the JCR cover won't fit with the S&B.

 

[Superg0]

Each has their fans. Note that the JCR cover won't fit with the S&B.

The JCR cover is the engine cover in the above pic?

 

[Deleted member 30736]

The JCR cover is the engine cover in the above pic?

Yes. It's a nice piece.

 

[Nw_adventure]

S&B intake or this?

S/B replaces the entire intake scoop in the front of the hood and upgrades the restrictive turbo inlet elbow. But I don't have direct experience with either.

 

[Deleted member 30736]

The aFe doesn't replace the inlet but has a removable disc on the driver's side of the box to allow for more airflow.

Sponsored