Search results

The RB model didn't work at all before, for Maverick_Dave. The LB model gave him distance adjustment only. I never had an RB so this is all we know. The RB is listed online as the correct part for 25-26 mavericks, but with a sample size of one we don't know if his switch was just DOA or...

Thanks for chiming in. I wonder then, if the original switch you ordered was the correct one, and that particular unit was just defective. @DashOfSalt84 If you order the R*** switch and do the install, let us know if it works. Otherwise the one I posted will for sure have cruise distance...

That steering wheel switch is WRONG, see the OP for the correct part#. R**** switch will not work, needs the L*** variant. See Maverick_Dave and I's interaction in the DIY mega-thread on pages 68-71. There is some hiccups to work out, for example the switch I listed has a lane centering button...

Sure, I used leftovers from my audio project. 18 AWG Stranded Wire and 1/4 inch Split Loom, 25 ft of each will be sufficient for this project. You only need one run with 4 conductors from the front bumper area to the rear seat back. There are other guides available for routing wiring under the...

This is how mine looks, but the steering wheel button still does nothing. Lane centering always on

That was my experience with the lane centering Button as well. There might be something else we are missing in Forscan.

If you want to add anything but ACC you will be the pioneer for 2025s. We only got the ACC working on 2025 models a few days ago. You might have no big issues adding BLISS and rear sensors, but there are modules your truck doesn't have that control some of them. My XL came with both of those...

Thats dope. I see you got a 2026 Mav, but yours probably already has the ACC lol. I dont see why this wont work on 2026 XLs and XLTs though, just would need another brave pioneer to attempt it before I add that to the post. ALSO I've never driven a vehicle with copilot 2.0 installed, so I'm...

new thread is up

Someone asked for a new thread, so here we go! 2025 Adaptive cruise is working, lane centering, stop and go, the works. The First key is the proper CCM. The CCM was updated between years, so the 2024 part won't communicate with the new IPMA. It may be the same as the 2021+ part from F-150s, but...

I looked through them, and compared notes from the other guys in the thread and to my sheet, every change looks good as is. Your starting values differ in a few places but the target remains the same.

They should be fine, just didn't get a chance to look at them last night. Are these factory values or have you changed anything already?

Dang, there really is no Rs in the spreadsheet man. I ordered this one, was a bit cheaper from rockauto, but seems out of stock rn. Said LB5Z-9C888-ac I think on the actual part sticker, but the listing was part# SW8585

Thanks. Without knowing anything else, I gotta ask are you sure you have the same steering wheel switch as I do? If so, I’m stumped. Your before and after on the whole pic matches mine. When I get a Chance I’ll look into EZ mode of mine and see if that also matches. I also wonder if there’s...

If you dont mind, may I see your SCCM save? Current and old one as well if you have it.

The module list is on the left column of this table.

Right, only a handful of us have attempted. If anyone can send me saved XLT asbuilts from the modules in my list, or the full file from the motorcraft website, as well as XLs with other options than mine I can take a crack at solving this.

Only took until I started noticing salvage from wrecked lariats on eBay. Their misfortune was our golden ticket. Pour one out for the homies later. most of the parts were the same as the 2024, I’ll try to put together a post soon if someone doesn’t beat me to it. There’s a lot more kinks to...

For the warranty, that's a grey area. Worst case, it voids the warranty on the IPMA, the cameras and parking sensors, etc, everything the IPMA controls. If you bork something else using forscan though, idk how that works. For the 2025 retrofit, forget about the fuse block. Just get 12v and...

What I did was a little funky. I used leftovers from my audio upgrades. Wire and split loom. I had some spare cat5 cable from a project where I was pulling wires and adding receptacles in my home. Twisted pair is good for canbus, but automotive wiring should be stranded not solid so I may...