Sponsored

Search results

  1. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    All of this works perfectly for me. I would check the harness to see if there is any bad cable. Are the cables all soldered?

  2. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I'm asking myself the same question and no one can tell me... I know it's an antenna connector, but I don't know which one. Is it the satellite radio antenna? :oops:

  3. Maverick Sync 3 to Sync 4 Conversion Part 2 - Installation ! Video # 2

    Can you upload the FORSCAN configuration?

  4. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I'm going to look for it, I know it has to be there because before I programmed it, the Ford logo was visible on the entire screen.

  5. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    It seems that Ford makes APIM with GPS and without GPS. The GPS antenna connector should be there, but this APIM doesn't have it.

  6. How To: Sync 3/4 swap for non Sync 3 XL/XLT

    Done! But with a 12" screen

  7. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Screen already installed. For some reason the home screen looks small after programming.....

  8. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    The brown connector is an antenna connector. I don't know what the other one is.

  9. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I think it's this antenna. https://www.ebay.com/itm/353865070119 It is a simple GPS antenna.

  10. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Does anyone know what the other connectors are for? Thanks!

  11. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Did you connect the climate controls? I tried without the controls and the radio didn't work. After connecting the climate control it worked. I used the codes that are at the beginning of the post.

  12. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I used the programming that is at the beginning of the post. But I can't say yet that everything works 100% Thanks!

  13. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    The same thing happened to me before programming. After programming the volume it stops marking 0

  14. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I didn't buy it, but I think I can make one.

  15. Sync 4 APIM Upgrade Complete! (Help with Issues)

    I hope to finish mine tomorrow and show you how it went!

  16. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    After programming, everything seems to work fine! Even the camera! Now we have to put everything together and find the maps for the GPS. Is it necessary to put an antenna on the GPS?

  17. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    First test without programming anything... The radio doesn't work. I hope it's because I haven't programmed anything yet!

  18. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Thank you very much for your help. I'll continue tomorrow!

  19. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I'm understanding more with this diagram than with the first one... In the first one it is not very clear what goes to the truck connector and what goes to the radio connector. Tomorrow I will do the cable

  20. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Yes!. Right now I'm making the map for how I'm going to cut and join the cables :crying:




Top