Search results

If I didn't like my Shadow Black Mav so much, that green would be my next choice. And if I remember right, they usually do 25% around July 4th. No promises though. And I have something on my wish list for the 25%.:fingerscrossed:

Those pics look just like the set that WJOHNM mentioned, not the same steps but the brackets look similar. The install directions are not very clear. I was able to install a set after some serious head scratching. I have offered before, if you are in the Orlando area I could help you get them...

Don't stress that little bit of oil left in the pan. There is still a lot of oil in all the passages to the crank, cam, overhead, etc. You will never get it all. Run the engine some, then drain while the oil is warm, while any junk is suspended in the oil, and you will get as much as possible...

I don't know how I never noticed that open area. tried to fix the area behind the left rear tire, just needed to look at the other side of the wheel well.:sadface: Now that I have seen it, I can't unsee it.:crazy:

You will want to go direct to the battery, they draw a good bit of power to lift a scooter.

I have Wet Okole seat covers , and can still feel the heat through them. They are built for side air bags also. Had the same in my 2003 Explorer sport trac, and liked them so much, I put them in the Mav.

Hey, how did you get a manual trans??? :crackup:

I got a good laugh about the 710 cap.:crackup: I don't think anybody picked up on that. LOL.:crazy::clap:

Are you using a pinch weld adapter with these? Looks like the flat top would crush the pinch weld spot when lifting the truck?

I get a slight shudder every once in a while, really no rhyme or reason for it.

Yea, we have all seen the videos of the Tesla drivers trying to put gas in.:crackup: And you are right, they need gas , but not much!!!

I'm just going to check the connections at the plugs, not going to get too carried away. I am a mechanic, I work on 18 wheelers, and the Ford dealer is in our parking lot, so I know the guys there. Plus, I want to take the console apart myself, so if it gets scratched up, I know who to...

Bluespec1, some good info there. :thumbsup:I'm gonna check the obvious stuff first, hopefully just a loose connection somewhere. I am going to access the inverter in the console and check there first.

Looks like I should have used the google search, seems to work better than the forum search, and still brings me back here. Looks like Darnon nailed it! I think I will try to access it before I take it to the dealer to get it checked out.

2024 Hybrid XLT, my 110voutlets do not work, I really do not know if they have ever worked. Found out when a friend tried to charge their phone in the back seat. I checked the plugs under the truck that I could find, just wondering where the inverter or inverters are located. Also, any info to...

You're gonna love the 40+mpg, welcome.:clap:

I installed a Rival skid plate, went easy. I just didn't like the gap at the front, and the nutserts with nothing in them, so I cut a 2.5 inch strip from the oem cover, and installed it at the front of the rival. Put it behind the Rival, and reinstalled the front screws. Doesn't really do...

Nice! I'm a little over a year also, I think I am just about done adding stuff.:sadface: I hope.:blush:

Nice!!!!:like:

👈 Gotta like a black Mav.:clap: