Search results

Just had my first oil change done at the dealership (free) at 2400 miles. For whatever reason the sticker they put on says next oil change at 7400 miles, even though the service advisor told me it’s a 10k interval. I’ll be doing it myself at every 5k from here on out.

Did you ever figure out your whining noise? I just noticed a slight whine on deceleration around 10-15 mph. Might be normal I just never noticed it before. It’s Pretty quiet I can only hear it with windows down.

For sure, the more info the better. I think I read every catch can thread on this site and countless YouTube videos trying to figure this out. I’m sure you can accomplish the same thing with cheaper cans but I bought a $40 Amazon can and was not confident that the media would stay together...

It’s a pricey setup for sure. I think I paid around 320 for it back in January plus all the fittings. I was close to buying the Buschur can but at $280 for just the clean side it would have wound up being more expensive to get both clean and dirty side set up. I was hoping to see more in the...

I’m not 100% on the conversion between AN and inches. I used a 3/8” inside diameter hose for the dirty side. And it was difficult to get the fittings in. I put some oil on the fittings and it was still pretty hard to get them in. It took a lot of twisting and pushing to get them on. For the...

That fitting is basically the same as what I’m using. It’s not a maverick specific kit, it’s a universal kit from radium engineering. http://www.radiumauto.com/Universal-Dual-Catch-Can-P189.aspx it’s pricey, but I liked the bracket which holds both cans together. I was also considering the...

That link won’t open. But I used barbed fittings with hose clamps on the cans. This is my setup. 3/8 hose for dirty side, 5/8 for clean side. I haven’t seen any evidence of leaks, but I also haven’t caught much of anything in the cans yet either. Probably about 1500 miles on the clean side with...

I purchased this, and used the connectors for the clean side with a 5/8 ID fuel hose. https://a.co/d/0twh8s2 Clean Side connectors are difficult to get off without breaking, I ended up breaking both of mine when removing the stock hose. Be careful when doing this, as the orange clip may break...

Next to a giant z71

Overall I’m pretty happy with how it sounds, but when I isolate the front stage by turning the sub down and fading to the front, it sounds a bit muffled. The harshness from the tweeters is pretty much gone since my new guy adjusted gains and high pass/low pass on the amp , mid bass is decent. I...

Updating this thread for anyone else who may be dealing with something similar. I bought a audio control lc6i. I installed the lc6i and replaced the junk RCA’s with crutchfield reference 4 channel RCA cables. I also got rid of the signal sense turn on and used a fuse tap on fuse 3 to turn on the...

https://www.hrgoffroad.com/front-skid-plate-for-2022-2023-2-0-l-maverick-only/

I made the carbon fiber plate. 4 layers of carbon fiber, finished with epoxy resin. I have L brackets on the back of the plate with 3m double sided tape so it can be removed.

Man tint makes these look so much better. Definitely need to do mine. I did something similar on my headlights using Vvivid vinyl tail light tint. Looks sick!

Got my carbonized grey 22 xl mid November ‘22. Only chips I have are on my tailgate from driving with it down when my atv is in the bed. They’re not really flaking off like yours is where you can see the primer underneath, just very small “dents”. Considering ppf. I also only have 2200 miles.

Proof of car insurance with your name on it. Had my card, but my car is on my dad’s account(multi car discount) so the card had his name on it. Was a bit of an issue but we figured it out.

Mine are the opposite, haha

Did the lc7i end up fitting? I’m going to try to make a bracket like this for my lc6i.

Just did mine. There’s definitely a reduced light output, but they’re plenty bright once I replaced the bulbs with lasfit. driver side stock bulb, passenger side lasfit, both lights zep’d Driver side stock light, passenger side zep’d, both running stock bulbs

He took the amp apart and inspected it. He said it looks like a good amp and didn’t think it was the issue. He thought the cheap loc, cheap RCA’s, and proximity of the ground cable to the RCA’s was the cause of noise. The amp is grounded to the factory ground location behind the back seat on...