Search results

I have two keys, but they can't seem to re-program the original key. I followed the process that Redneck laid out so I'm trying to figure out if it's softlocked out or if I'm messing up somewhere.

Dealership replaced the BCM and gave me two keys (one I gave them and one new) when I picked the truck up. Now my old key doesn't work and when I try programming, it says "no key detected". Is it possible I'm programming it wrong or did they brick the old key when they reprogrammed and there's...

That's correct. I'm still using the OEM lights so I'll need to confirm how they work with the Lasfits. It might be okay since the power output is likely the same or close to what they would do as normal headlights. The issue right now is that the parking lamps only have the option of being...

I finally got it to work with some slight modifications. Settings are posted below, can someone validate that they achieve the same results? Modifications: Low beam with DRL = Disabled Left & Right Front Turn Lamp Usage = Turn and DRL Left & Right Front DRL Usage = Disabled Results: Light...

UPDATE: I took my (hybrid) truck in for the software update regarding the grabby brakes. I noticed that afterwards, the 12V outlets STAYED live after I turned the truck off. I haven't tested to see how long it took, but at least 5-10min. I was only running a small LED and there was no...

Puddle lamp ground fault also showing. With the XL, there definitely aren't any puddle lamps so I'm curious what it's referring to.

You can, but a better way might be to connect to the 12v power terminal from the rear light housing assemblies. If you're going to be tapping them for the left/right turn/brake, you might as well tap the 12v common as well. This gives you the ability to control the power from the cab. If you...

Hybrid XL: I get a really fun message indicating the HV battery is connected "Ready to Drive" combined with a nice diagram of which seat belts have been connected. If I need to change the drive modes or look at my settings, I either have to click through the messages or wait for them to timeout...

I've disabled the the timeout and run into the same issue where the 12v (cab and truck bed pigtails) turn off as soon as I turn off the truck and open the door.