If I have my EQ set to flat in forscan, and I'm using a kickery key 200.4 in bi-amp mode for component speakers and a JL powered microsub + for bass, do I need to use A LC2I or similiar LOC? Some say the LOC is a waste of money since the key works great straight from the high level inputs but...
Thanks for the reply guys. I have the PAC LPHFD31 LocPro Advanced T-Harness. Do I need anything additional to wire the kicker key in? Depending on where I read I see mentions of addition harnesses, like output converter, etc.
I’m wanting to put in component speakers. I have the non B&O. I already have a the PAC T Harness as I installed a sub. I’m wondering what I need to do to get good sound to the components. Should I use a Kicker Key, should I add a dedicated DSP, or is the signal coming straight from the stock...
Is it possible on an XL to install footwell/ambient lighting that either turns on when the door opens or when you flip the switch to turn on the front and back lights? I assume there is a wire that can be tapped that powers the map lights to do this. Has anyone done it before?
On a non B&O truck, is there a wire behind or under the seat to tap for power? I would like to have a usb charger to keep my lithium jump box topped off that lives under the seat.
Ordered through Granger with the $3k off deal. They were such an easy dealership to work with. Everything upfront. No attempt to up-sell. No hidden fees. Incredibly satisfied.
Anyone know what this might be for? It clearly looks like it was an afterthought. It certainly isn't a clean look.
Here's where it starts.
It goes through the firewall here. It looks like someone took a razor blade and cut the grommet. It comes out of the firewall, runs along the tray below the...
My Kuat transfer will not allow the tailgate to go all the way down. Anyone have recommendations? I'm not talking about a frame rack, but one that the tires sit on.
I had a hard time with it. Dealer couldn’t fix it. Their solution, more silicone and complaining about the truck. I ultimately did the following and now have no leaks. I chose this method because I want to easily be able to remove and reattach the topper without having to reseal everything every...
I'd like the seat bottom to have a little more tilt toward the back. Has anyone ever raised the front of the seat to accommodate this? If so, any advice?