Great post, I bet A LOT of people will be happy to see this one. As mentioned, many folks aren't comfortable playing with the hexadecimal settings.
Setting the factory EQ to flat is another good one for those of us playing with the audio. It is under the ACM setting. I believe it is listed...
I'm glad you got your low bass back into the mix now! It is amazing how those last few Hz missing can affect the tunes. I'd definitely re-run the setup on the Key to get the most out of it. Happy tinkering man :D
You're correct, that is a little low on the crossover, which is why I have that 48db slope in there. I wanted to get a much of the lower vocal range in there as possible without toasting those little guys, haha. So far I've not had any issues whatsoever.
I don't have a Puzu. I have an Audio...
This is exactly what I used for my rears, and exactly what I did to fill those giant openings on the factory panel. These little guys do quite well for rear fill duty! I've got them crossed over at 120hz at 48db to keep them safe. Great job, look forward to what's coming.
It does operate on it's own independent Android system, so it can run almost any app on the truck's display. Google play store works just like it would in your phone. That is, if you're not using AA/ carplay from your phone. You can also connect your phone to it via Bluetooth and voice calls...
I don't honestly know, but I would assume so? I would imagine that it'd be pretty useful for tracking the dog though. I really enjoy being able to run almost any android app right there on the truck screen :D
If you want to skip screwing around with your phone to listen to your MP3's and are tired of Ford's asinine USB search while moving, you need an "AI box". It's basically a tiny little box that runs it's own Android operating system that will interface with your factory head unit. You can put...
Dude, I LOVE the vintage polk audio stuff! They have such a nice mellow sound. I actually have a pair of polk monitor 11Ts from the 80s in my living room right now(I did rebuild the crossovers and replace the tweeters with silk dome). I'm running a pair of polk 4" in my rears on my truck for...
I'll take the red one please!! You are absolutely right, there's always something better. I was just thinking that masterpiece of an enclosure you built deserves a little better sub is all :) The pioneer shallow mounts are decent for what they are, but the tech has come so much farther since...
I'm glad you got it where you wanted it! I feel you though, the Maverick has been one of the most difficult setups I've had as far as getting the sound how I wanted it. Switching that EQ flat definitely brought back the real low end that was missing. People don't realize how much bass content...
The changes in reply #25 of this thread are all that is needed to bring the bass back. At least in my case. I'll also note that I'm getting my sub signal from the front speakers, and not the rears. I don't know if that would necessarily make a difference personally(I've heard conflicting...
When it comes to these trucks(and most recently built vehicles), upgrading anything with the factory head unit is not going to be cheap or convenient. I think there's one company that is selling(or are about to) a kit to replace the factory head unit with an aftermarket one, but it was limited...
I DESPISE the electronic parking brake. That is one of my biggest disappointments with the Maverick. As others have mentioned, the manual brake can be quite useful in certain driving conditions like ice or wet clay dirt roads. It is an added tool in the car control tool box, and I really miss...
Check to make sure your tire pressure isn't too high. Some trucks came from the dealer with well over 40psi, and that will most definitely affect the ride.
I hate to beat a dead horse, since I've mentioned it a few times, but... Have any of you with the battery issues pulled fuse 11 to see if that affects your deep sleep? I'm not saying that's your issue, but I'm genuinely curious to find out if the truck trying to communicate all the time is the...
There's no need for a master disconnect for your audio. Just wire a proper turn on lead, instead of using the signal sensing turn on. I believe the previous poster was implying a master disconnect from the entire truck, which I'm sure would keep the truck functioning. I only mentioned pulling...
I think you missed some of the posts. There are many people that have taken their trucks to the dealer multiple times, and the problem still persists. The dealers have been unable to remedy the problem in many cases, and people have new vehicles they cannot depend on. It may not be that big...