Search results

I did a 70% clear ceramic for the whole front window and it has been a game changer when driving into the sun. Will do that for all future cars over the top stripe

Finally got around to snapping a picture of my Katskin seats. Definitely a huge upgrade, especially on long drives and with this heat we’ve been having. I know the Maverick is a budget truck but vinyl on the upper trims was just not cool. Ended up sticking with the factory heating, though if I...

Really great write up!! I ended up doing a G900 Pro which is the same but only 2 cameras. Used the same mount over the high mount brake light. Completely agree with you about it pretty much eliminated blind spots. The phone app works really great to review footage with a handy map to show gps...

i’ve been having trouble understanding their harness system, so the one you have linked is that just for the lower marker to give you a runtime LED? I’ve been eyeing the turn signal fender badge as my next project. I have a lariat which complicates the wiring some since my front turn signals...

It’s been a little bit since I’ve made any headway. Started a second job that’s been keeping me busy. Couple that with two almost 3 year-old not a lot of time to make any modifications or improvements to the truck. I did finally got around to ordering Katzkin seats. Hoping to have them...

Received in the mail today and got it installed. Works perfect and exactly what I’ve been looking for. I was worried that it would hang over towards the front of the truck touching some of the painted roof, but it doesn’t. It’s 100% isolated to the third brake light. Thank you OP.

You really didn’t have to do that right now. It is extremely appreciated! Doesn’t look like any light bleed/reflection from the shroud which is really nice to confirm. Thank you for sharing the find and running the test. Just ordered one for my truck 😁 I was in the process of scanning the...

I really like this. Been trying to figure out a solution. Even bought a morimoto 3rd brake light with camera hole from an f150 but the angle was point right at the bed so useless as a rear view. Would be curious about possible red light bleed washing out at night. Would it be possible to get a...

True that. Simple is sometimes better.

That red is really nice! Congratulations on the new truck. I’m torn on the rear window being optional now. My 25 lariat came with it and I do use it to get some fresh air without cracking a door window by someone’s head. But it is so small and looks so much cleaner without it. Did you get a...

Wish there was a matching 3rd brake light available. The morimoto looks good but really like the red accent of these

Did you go with ventilated too? I am just north of you in Cookeville and the drive down to Chattanooga could be worth it. Did you go with ventilated too? I am just north of you in Cookeville and the drive down to Chattanooga could be worth it. Almost have the wife talked into in, especially...

Best I can tell, it looks like that would be part # DD4150 if you already have a C1R brake led puck. https://www.summitracing.com/parts/dod-dd4150

Sorry for digging up an old thread but what did you end up landing on? I am finding myself in a similar situation with my 25 Lariat, after optioning out an XLT with Lux and tow it was only about $1k more for the lariat which got lane keep, radar cruise, and 360 camera. Came from a leather Mazda...

If it wasn’t for the fuel efficiency and the unibody making the Maverick drive like a car I have considered going up to a midsized like ranger, Tacoma or even the new frontier. Part of why I haven’t pulled the trigger is I realized it is just a want for a bigger truck. The Maverick does...

Same place as yours in the fender badge then put a lens over top. Would need to flush mount from the back of the badge so only the round part of the led is coming through.

I have been eying doing a set of hide away amber lights. These Feniex have 3 trigger and can be programmed to be solid on at various brightness levels. Idea being solid on at lower brightness for running lights then full solid for turn signal to match with the front blinker...

Have a write up on doing the C1R hitch light pod for running light, reverse, and 4th brake light that’s working for me on my 25. Only hitch (pun intended) is you have to have a seven pin connector ie 4k tow...

I just completed this today for my Wolfbox g900 pro. I took out the backseat roof light, the black plastic shrouded protecting the front camera, and the map light/sunglasses holder (don’t have a moon roof). Then ran a fish tape towards the map light from the back seat light to pull the wire...

I have my rear 35% tint overtop the factory which does make it rather dark back there.