DIY: How to Add Heated Steering Wheel to an XL Maverick

[Brett3550]

Awesome writeup and great job! I'm modded out for the time being so my heated gloves will have to suffice!

Sponsored

 

[Vtec87pr1]

Awesome writeup and great job! I'm modded out for the time being so my heated gloves will have to suffice!

nice man. i might join the club soon on the mod . or maybe buy me another maverick later to make it full track.

 

[Angel1221]

Thats for the heated steering wheel . Thats the cable that feeds power and ground to the element.

If i plug it in will it be as simple as adding it with forscan or will I need to do everything you did?

 

[JefCo]

I enable it on the SCCM , IPC , ACM , and BCM and HVAC I thought and belived i had seen it where you could control the time i
But i cant find it. But i did find the temperature adjustment.

Have you tried looking for the coding?
FORSCAN can be so complicated.

 

[Vtec87pr1]

If i plug it in will it be as simple as adding it with forscan or will I need to do everything you did?

Do you have an Xl ?

 

[Vtec87pr1]

Have you tried looking for the coding?
FORSCAN can be so complicated.

No . I will do it this weekend

 

[Angel1221]

Do you have an Xl ?

I do

 

[Vtec87pr1]

I do

Then you need to do everything i did

 

[James K]

Will need to enable Heated steering wheel with Forscan. I will Post tomorrow the captures screen of the process . i hope this help feel free to ask any question if needed.

Parts Needed for heated Steering wheel

Ford Escape or Maverick that comes with heated wheel .

Steering Control module theres 3 diffrent ones for the Ford Maverick you will need to buy the one thats its on back order lol . i could not wait so i bought the one with lane assist.

Part number for Steering Control Module with clock spring . NZ6Z-3F791-DA WITH LANE ASSIST '''

Connector for Steering Control Module for power and Fuse

C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404
Terminal for wire harness from steering control module to lower floor connector.
1L2T-14421-BA . i will post tomorrow another part number i found.


Heres some pictures of the procces of steering wheel removal. Make sure disconnect the negative battery terminal before messing with air bags.

Ok Heated conversion wiring diagram time !!

as you can see the 22 XL doesnt come with this connector.

C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404

So this wires one needs to go under the floor circuit 160 pin 2 wich its power from fuse box wire its Yellow Green .

Pin 1 its just Ground theres a area next to the instrument cluster where you can install it and theres one next to the dashboard chassis on the driver side.

Heres and example on where to harness will be installed behind the steering wheel control module.

You will need to install a terminal on the female side connector on the bottom of the foot rest pad. its the one that says 3873 on the picture below.

it will be Pin 38 on the bottom connector.

PART NUMER OF TERMINAL THAT WILL BE NEEDED TO INSTALL ON CONECTOR I FOUND 1L2T-14421-BA .

DIAGRAM IM USING FOR HEATED STEERING WHEEL

Good news for anyone that has an XL version of our truck all you need its the Steering Control Module and add the harness that i made and enable it with forscan. The Steering Control Module comes with the Clockspring and switches. The one i was looking for with out the lane keep avoidence switch was on back order so i got this one and works great. Heres some pictures i will move them around later in order.

Wow, you must hate cold steering wheels as this doesn't appear a quick little project. Nice job, well done!

 

[Vtec87pr1]

I intenionaly wanted to add paddle shifter to the truck , and saw that it had the heated stuff on the steering wheel so i just added the heated cables and wiring and thats it

 

[philbradley]

Thanks just part of my traning . Learn something new every day.

follow-on question…I have a ‘23 hybrid XL with CoPilot360…the 360 package for the XL didn’t include ‘assisted cruise control’ (maintains consistent distance between me and vehicle in front of me by automatically adjusting my speed) which was the main reason that I chose the option. Could ‘assisted cruise control’ already be there, and just needs to be ‘turned on’, similar to the heated steering wheel feature?!?!

 

[Vtec87pr1]

follow-on question…I have a ‘23 hybrid XL with CoPilot360…the 360 package for the XL didn’t include ‘assisted cruise control’ (maintains consistent distance between me and vehicle in front of me by automatically adjusting my speed) which was the main reason that I chose the option. Could ‘assisted cruise control’ already be there, and just needs to be ‘turned on’, similar to the heated steering wheel feature?!?!

I think you will need to add the radar in front of the vehicle for this option. Unless yours has the radar.

 

[philbradley]

I think you will need to add the radar in front of the vehicle for this option. Unless yours has the radar

I think you will need to add the radar in front of the vehicle for this option. Unless yours has the radar.

How would I know whether it does? It obviously has cameras that identify vehicles behind and to the side, and once I got a ‘collision warning’ when someone pulled over in front of me…

 

[Vtec87pr1]

I might be wrong but it could be in the front grill by the camera. I dont really know.

 

[philbradley]

I might be wrong but it could be in the front grill by the camera. I dont really know.

would you happen to have a picture of what I’m looking for???

Sponsored