BOSS MAV (Maverick build inspired by BOSS 302 Mustang)

[Barksdale123]

Boss ‘Stangs didn’t have hood deflectors.
Just say’in.

Otherwise, I like it!

Maybe no one made them.

Sponsored

 

[damnclose]

My BOSS MAV,
Hi everyone got my cyber orange a Mavrick a month ago.
From the first time I saw the CO color on the Maverick I knew what I had planned for it.
I've even seen a post where someone else had a similar idea.
The truck is not completely done but I figured I show you all where it is so far.
I have added Raptor spray in bed liner, a hard tri-fold fold bed cover, mud flaps, and hood guard already. I laid out the hood stripe side hockey stripes and did a blackout panel on the tailgate too.
Still to come I plan to spell out BOSS and possibly MAV under it at the start of the hockeystick by the hood.
Much like a BOSS 302 Mustang which the paint job pays an homage to.I also planning to mount a couple of Hella 500 driving lights just above the front license plate.
Ok, here goes!

My BOSS MAV,
Hi everyone got my cyber orange a Mavrick a month ago.
From the first time I saw the CO color on the Maverick I knew what I had planned for it.
I've even seen a post where someone else had a similar idea.
The truck is not completely done but I figured I show you all where it is so far.
I have added Raptor spray in bed liner, a hard tri-fold fold bed cover, mud flaps, and hood guard already. I laid out the hood stripe side hockey stripes and did a blackout panel on the tailgate too.
Still to come I plan to spell out BOSS and possibly MAV under it at the start of the hockeystick by the hood.
Much like a BOSS 302 Mustang which the paint job pays an homage to.I also planning to mount a couple of Hella 500 driving lights just above the front license plate.
Ok, here goes!

Looks sharp on Cyber Orange.

 

[Ford Motor Company]

My BOSS MAV,
Hi everyone got my cyber orange a Mavrick a month ago.
From the first time I saw the CO color on the Maverick I knew what I had planned for it.
I've even seen a post where someone else had a similar idea.
The truck is not completely done but I figured I show you all where it is so far.
I have added Raptor spray in bed liner, a hard tri-fold fold bed cover, mud flaps, and hood guard already. I laid out the hood stripe side hockey stripes and did a blackout panel on the tailgate too.
Still to come I plan to spell out BOSS and possibly MAV under it at the start of the hockeystick by the hood.
Much like a BOSS 302 Mustang which the paint job pays an homage to.I also planning to mount a couple of Hella 500 driving lights just above the front license plate.
Ok, here goes!

That's a stunning Maverick, David!

 

[Ford Motor Company]

Mine came with BAP, AWD, Hitch receiver and SIBL among other things. Have added a retrac cover, mud flaps, window tinting, hood struts, tailgate assist and several interior additions.
Great job on the stripes! The CO is made for black accents!

Wow, Hal! That's a stunning Maverick!

 

[K5Blazer]

Maybe no one made them.

Thank goodness!

 

[Halo9x]

Wow, Hal! That's a stunning Maverick!

Thank you! I think the CO color lends itself to some fascinating possibilities .

 

[Your_Cousin_Vinny]

I really appreciate how you used the lines of the fender vent to dictate the angle for the side stripe. That's great design detail. this looks fantastic.

 

[DavePamh]

Well done!!

Thank you, I have only owned my Mavrick about a month now. But like everyone on the Maverick truck club site, I find it a fantastic vehicle. With so many ways it can be used, be it work, play or whatever. It's is what we all are looking for. Ford hit the nail on the head with this one!

That is very nice execution, and the tailgate is particularly fine in terms of design.

Thank you for the comments on my truck.

 

[DavePamh]

That's a stunning Maverick, David!

Thank you, I appreciate all the support from the members of the club.

 

[GPSMan]

I'm doing a Boss Hogg inspired Mav.
Makes more sense, right???
🫢

 

[Halo9x]

Thanks for the comments, can I ask how do you like the roll top bed cover?
I went with the hatd tri-fold thinking it might be more durable in the long run.
I also think that the (BAP) black interior looks great, and the pups in cubby tops it off.

Hi, thanks for the comments. I did look at running the stripes across the back of the hood, even following the curve of the back of the hood.
But finely dropped the idea when trying to lay it down with the tape.
You see the problem is because the hood is not flat like on a Mustang.
It has not only different heights but multiple angles in it.
This just didn't look good, standing back and looking at it made the edge of the line look crooked and not straight at all.
The line changed as you looked at it from different angles.
I just finished painting the BOSS MAV just like other day I am thinking about adding some black letters or maybe US Flag letter now.
Take care

I did a bit of research looking at the various options for the bed cover and decided that the retractable cover was the best option for a permanent solution. I bought the SyneticUSA cover from Truck2Go and have nothing but good things to say about it. I did get a 5% discount so my total cost for the cover, shipping and installation was $1007! You do lose about 18” of bed space but since this is not a work truck for me, I don’t care. It looks great as well as functional. If you can install it yourself then the cost is even less. For me, it was worth the $65 to have it installed. It does allow a little water in from the car wash but nothing major. I highly recommend it.

 

[Halo9x]

I'm doing a Boss Hogg inspired Mav.
Makes more sense, right???
🫢

I saw a car here in Abilene that was very similar.

 

[DavePamh]

That's a stunning Maverick, David!

Wow, I am honored that someone who is from Ford would give my Maverick such praise.
Thank you David

 

[DavePamh]

I did a bit of research looking at the various options for the bed cover and decided that the retractable cover was the best option for a permanent solution. I bought the SyneticUSA cover from Truck2Go and have nothing but good things to say about it. I did get a 5% discount so my total cost for the cover, shipping and installation was $1007! You do lose about 18” of bed space but since this is not a work truck for me, I don’t care. It looks great as well as functional. If you can install it yourself then the cost is even less. For me, it was worth the $65 to have it installed. It does allow a little water in from the car wash but nothing major. I highly recommend it.

I'm telling you with that kind of glowing endorsement. I now wished I'd gone the roll top route. Not to say that there's any problems with the hard tri-fold type that I have now. I Just kind of like the looks of it.

 

[SuperDAD1058]

Mine came with BAP, AWD, Hitch receiver and SIBL among other things. Have added a retrac cover, mud flaps, window tinting, hood struts, tailgate assist and several interior additions.
Great job on the stripes! The CO is made for black accents!

My CO Hybrid is supposed to arrive in two weeks. Luv all your pics and ideas for accessories!!! Thanks everyone

Sponsored