Red Headed Rebel XL Soft Roll Up Tonneau Cover - Review / Feedback Added

[TS0323]

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.


UPDATE:

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

Sponsored

 

[Naranjita]

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.

Look forward to your pictures and review!

 

[TS0323]

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

 

[DeanR]

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

Looks good may order soon. Any regrets, tips?

 

[TS0323]

Looks good may order soon. Any regrets, tips?

None so far. It did leak near the cab/front side during some heavy rain, but I adjusted it to have the front flap fully underneath the lip and it seems to have a better seal now. I did order a front weatherstrip/seal from Access just in case but I’m not sure I need it now. Also make sure the rails are slightly higher than the plastic trim near the rear end so you can close the Tonneau even with the tailgate up.

 

[DeanR]

None so far. It did leak near the cab/front side during some heavy rain, but I adjusted it to have the front flap fully underneath the lip and it seems to have a better seal now. I did order a front weatherstrip/seal from Access just in case but I’m not sure I need it now. Also make sure the rails are slightly higher than the plastic trim near the rear end so you can close the Tonneau even with the tailgate up.

ordered mine today, looking forward to it. Thanks

 

[boe757]

RHR Swag, installed 9 Jan, no issues about $325 was in stock, 3 day delivery

 

[Rob Daman]

very clean looking

 

[JASmith]

Can't beat the price. How much do you reckon it weighs?

 

[MightyNando]

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.


UPDATE:

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

That's because nobody in this forum has really gotten a truck laughing my ass off

 

[KeinoDoggy]

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.


UPDATE:

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

Just want to mention that I bought the Gator SFX tri-fold and the length is perfect. 10 minute install and got mine for $250 shipped.

 

[RustyF150]

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

Looks good. I like your hitch step too. It's a nice size. Where did ya get it?

 

[TS0323]

Looks good. I like your hitch step too. It's a nice size. Where did ya get it?

Thanks! It's the WeatherTech bumpstep.

 

[montyql]

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.


UPDATE:

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

I haven't seen anything else on this tonneau cover at all, at least not the Maverick version:

https://rhrswag.com/product/rhr-xl-rollup-bed-covers/

It's definitely on the thicker side, but from what I've seen on the Santa Cruz forums, it's pretty similar to the Access Original Tonneau Cover which usually sells for like $500.

I was able to use a coupon on it to bring it down to $340~ and it should arrive next week, so I'll update once I have it installed.


UPDATE:

I already received and installed mine today!

The install took a little longer than expected, but it feels solid and doesn't have the issue of being too short that many cheaper soft tonneau covers seem to have. I'll have to see how it holds up, of course, and I may need to add some extra weatherstripping if it leaks, but overall I'm very happy!

My only remaining project is to replace the tailgate letters with some 3D bright red lettering, and to get my chipped windshield replaced when the part arrives.

Nice to see another ATL Alto Blue Hybrid Mav!
Does that bump step block the license plate?

 

[TS0323]

Nice to see another ATL Alto Blue Hybrid Mav!
Does that bump step block the license plate?

Not really, maybe very slightly on the left side.

Sponsored