Maxzina-Maverick Rear Wheel Shock Shield Cover Available Now!

[Maxzina]

2024 XLT Ecoboost has (3) holes also - though there is a slot in the metal behind the plastic (as seen in pics in post above) - but not sure fasteners will reach that depth. I was going to put mine on (recvd today) but alas life got in the way

Cheers

Expect!

Sponsored

 

[MosesP]

Went a different installation route. Tool made everything easy. Had to drill new holes on top going this route.

 

[Maxzina]

Went a different installation route. Tool made everything easy. Had to drill new holes on top going this route.

Did you install it inside a plastic lining? Hidden the shock cover inside?Amazing idea!

 

[MosesP]

Did you install it inside a plastic lining? Hidden the shock cover inside?Amazing idea!

Yes, installed behind the lining. most of the lining had to be loosened for this.

 

[Maxzina]

Yes, installed behind the lining. most of the lining had to be loosened for this.

Will this installation cause damage to the lining?

 

[MosesP]

Will this installation cause damage to the lining?

Initially, no. Later in the future, no idea.

 

[Maxzina]

Initially, no. Later in the future, no idea.

Okay.Thanks for your message.

 

[TRUCKHEF]

Can you make this as a front fender liner?

 

[Maxzina]

The batch has arrived.If you haven't purchased it before, you can click on this link.
https://www.amazon.com/promocode/AEM16OXCQTKN6
promocode:NZUAURMH

 

[Maxzina]

Can you make this as a front fender liner?

Yeah.We have.

 

[Tuch]

Yes, installed behind the lining. most of the lining had to be loosened for this.

I'm looking to install it this way, no matter what or no go. I have fender flares, so removing the lining all together is out. Do you still think it's doable?

 

[24hrsun]

I just installed these today. The fit for these is not very good. One hole is missing and cannot be used on the truck that apparently is expected to secure the pieces in place. No logical way I can see to relocate the emergency fuel release on the hybrid model. The alignment isn't great on this product. I managed to get them in place, but this isn't as good a fit as the other products I have bought from Maxzina. This part needs to be reworked for a better fit. If I have to use the emergency release I will have to use the trim tool and pull that cover off to access the emergency release. Not ideal. Hopefully that doesn't become a thing that I have to do.

Sponsored