Has anyone received a factory tonneau cover?

[HS DAN]

Anyone ordered and received a factory tonneau cover, in particular a hard rollup type?
If so please post some pics.
Also, any experience with delays due to adding this to a factory order would be appreciated.

Sponsored

 

[olderbudwiser]

Anyone ordered and received a factory tonneau cover, in particular a hard rollup type?
If so please post some pics.
Also, any experience with delays due to adding this to a factory order would be appreciated.

Thanks for asking this.

I have a tri fold hard cover ordered so Im certainly interested in pics as well.

 

[Frobozz]

Our factory fold-up tonneau took only a week to get to the dealer, and it's been installed now. It looks great. The dealer waved us off of the roll-up, saying they were hard to come by (I wanted the fold-up anyway).

 

[Anton4]

I have the hard roll up cover from the factory. I’ll try to post some pictures in the mornIng.

 

[Anton4]

Here’s a couple photos of the hard roll-up tonneau cover.

 

[FirstFord]

that's a pretty high stack when rolled up.

Wonder if the new BAK Revolver 4S is a little lower. I have no basis for expecting that though.

 

[ARoughLanding]

that's a pretty high stack when rolled up.

Wonder if the new BAK Revolver 4S is a little lower. I have no basis for expecting that though.

Still more visibility than a folded up tri-fold which would cover the whole window.

 

[James St. Patrick]

Anyone ordered and received a factory tonneau cover, in particular a hard rollup type?
If so please post some pics.
Also, any experience with delays due to adding this to a factory order would be appreciated.

I received my factory hard roll up cover yesterday. Will probably install tomorrow or Saturday, and I will take some pics. Fairway has them in stock.

 

[Frobozz]

I have the hard folding. Too busy to shoot it right now but it's a quality cover/looks good and is secure. I really like it.

 

[HS DAN]

that's a pretty high stack when rolled up.

Wonder if the new BAK Revolver 4S is a little lower. I have no basis for expecting that though.

Great question. That's what I was wondering also. The BAK Revolver X4S can be bought for $929.99 on deals.tonneaucovered.com
If anyone can post a pic of that one rolled up to the rear window, it would be nice to compare to the pic of the Ford version.

 

[RAMS]

Here’s a couple photos of the hard roll-up tonneau cover.

Looks great. What length did you go on the 2x6 to be able to fit the foam on the side. Which foam did you use?

 

[Anton4]

Looks great. What length did you go on the 2x6 to be able to fit the foam on the side. Which foam did you use?

I went with a 2x8, and it's cut at about 53.25". I started a bit long and then trimmed it a little at a time as I fit it in with the foam. The foam is just 1/2" pipe insulation.

 

[pxpaulx]

that's a pretty high stack when rolled up.

Wonder if the new BAK Revolver 4S is a little lower. I have no basis for expecting that though.

I believe they are almost the exact same... If not exactly. Bak makes the Ford hard roll-up.

I have the truxedo sentry ct. It isn't as bad as it looks from the outside, visibility is still decent from my couple of drives with it rolled up.

 

[triphopjuke]

Here’s a couple photos of the hard roll-up tonneau cover.

Can a person weighing 150 pounds stand on it without damage to the cover?

 

[Mav2Scamp]

It also has the Ford emblem on rear driver’s side.

Sponsored