- First Name
- Dave
- Joined
- Jan 2, 2024
- Threads
- 16
- Messages
- 839
- Reaction score
- 1,058
- Location
- Fruitland Idaho
- Vehicle(s)
- 2023 XLT Hybrid pushing a 40 foot diesel motorhome 2014 Toyota 4Runner Limited
- Engine
- 2.5L Hybrid
- Thread starter
- #1
Several months back I read on here about the gentleman who had used these parts to create side marker and turn signals on the cheap! Sorry, but I can't find that post. At that time Mabett was still working on their own design. It involves a purchase on Esty from a kid who 3D prints the lens. I like the lens as it is close (but not exact) on the color and it looks more like something Ford would do. I wish the material could be made to match the "clearness" of the side marker light. That would be perfect in my opinion. The lens is about $25 bucks plus shipping and the LED bulbs were $9 bucks for the two pack. Very easy to install, you do have to drill a small hole in the factory side piece. Easy to just remove it and do it all on the bench. I like the Mabett version, but don't care for the color and it is a bit "flashy" for me. But, I understand everyone has their own tastes and I am just throwing this out there. Message me if you need more info.
https://www.etsy.com/listing/1375201097/diy-fender-light-lenses-covers-for-the
https://www.amazon.com/dp/B096J2T74...7&peakEvent=4&dealEvent=1&language=en-US&th=1
Had to edit to include second video of the turns working. (fat fingers on
Keyboard) Lets try this.
https://www.etsy.com/listing/1375201097/diy-fender-light-lenses-covers-for-the
https://www.amazon.com/dp/B096J2T74...7&peakEvent=4&dealEvent=1&language=en-US&th=1
Had to edit to include second video of the turns working. (fat fingers on
Keyboard) Lets try this.
Sponsored
Last edited:
