Sponsored

Request: measurements for DIY cargo rails

russross

2.5L Hybrid
Well-known member
First Name
Russ
Joined
Jun 22, 2021
Threads
4
Messages
62
Reaction score
106
Location
Southern Utah
Vehicle(s)
2022 Maverick XLT Hybrid
Engine
2.5L Hybrid
I'm a non-Lux order and would like to add my own cargo rails, probably using L-track. My questions:
  • How long are the factory rails? Do they fill up the available space?
  • How many screw holes are there/how many screws hold in the factory rails?
  • What is the spacing between screws/screw holes?
  • How far are the screws from the ends of the factory rails? Are they centered, i.e., is there the same amount of space from each end of the rail to the first screw on that side?
There are a lot of L-track options out there and I'm trying to figure out the best approach. Some come pre-drilled, but if the holes are the wrong spacing then I'll probably look at undrilled options instead.
Sponsored

 

MAVRICK

2.5L Hybrid
Well-known member
First Name
Any
Joined
Jun 29, 2021
Threads
27
Messages
305
Reaction score
435
Location
USA
Vehicle(s)
2023 XLT
Engine
2.5L Hybrid
I'm a non-Lux order and would like to add my own cargo rails, probably using L-track. My questions:
  • How long are the factory rails? Do they fill up the available space?
  • How many screw holes are there/how many screws hold in the factory rails?
  • What is the spacing between screws/screw holes?
  • How far are the screws from the ends of the factory rails? Are they centered, i.e., is there the same amount of space from each end of the rail to the first screw on that side?
There are a lot of L-track options out there and I'm trying to figure out the best approach. Some come pre-drilled, but if the holes are the wrong spacing then I'll probably look at undrilled options instead.
 
 




Top