Ready Brute Elite II towing system install on 2024 Maverick Hybrid

[gwrace14651]

Greetings all
It's been several months since I purchased my Demco baseplate and NSA Ready Brute Elite II towing system. Finally got a break from daughters wedding plans and other projects to get this completed. The baseplate installed with no issues. Wish to thank @BradnChristine for the document and assistance.
For those who have installed the NSA Ready Brute tow bar setup with the surge brake or had it professionally installed could you please post a picture from inside the cab of where the two cables were brought through the firewall and attached to the back of the brake pedal arm. I saw Linda B's post but that photo looks like the cables are left of the pedal and not directly behind it as the instructions say to do. It may just be the angle of the photo. Thanks in advance. I called around to have this installed but they only wanted to do the baseplate and not the surge brake setup.

Sponsored

 

[gwrace14651]

After much research I decided to switch to an RVIBrake3 with the tablet. Also added the wireless breakaway switch. so no drilling holes in the firewall. Managed to catch a 4th of July sale at 12% off the entire order, no tax and free shipping. Has a lot of nice features that include a brake alert warning, active monitoring and 30 second setup.

 

[Sir Tyne]

That's what I've been using for years. There have been a lot of improvements on the tablet and the Command Center Hub. All the early issues with the system seem to have been solved. I also added their Towed Battery Charger to the new Maverick. If you want to also add their Tire Patrol system, I hear they are finally going to replicable batteries on the TPMS sensors later this year.

 

[Tygger5]

After much research I decided to switch to an RVIBrake3 with the tablet. Also added the wireless breakaway switch. so no drilling holes in the firewall. Managed to catch a 4th of July sale at 12% off the entire order, no tax and free shipping. Has a lot of nice features that include a brake alert warning, active monitoring and 30 second setup.

Did you have to install a floor board brace for the RVIBarke3 or remove floor mat for it to work?

Thanks

 

[wax87]

Greetings all
It's been several months since I purchased my Demco baseplate and NSA Ready Brute Elite II towing system. Finally got a break from daughters wedding plans and other projects to get this completed. The baseplate installed with no issues. Wish to thank @BradnChristine for the document and assistance.
For those who have installed the NSA Ready Brute tow bar setup with the surge brake or had it professionally installed could you please post a picture from inside the cab of where the two cables were brought through the firewall and attached to the back of the brake pedal arm. I saw Linda B's post but that photo looks like the cables are left of the pedal and not directly behind it as the instructions say to do. It may just be the angle of the photo. Thanks in advance. I called around to have this installed but they only wanted to do the baseplate and not the surge brake setup.

WHAT? You are involved with your Daughters wedding beyond Paying for it? Can't be true! LOL

 

[Sir Tyne]

Did you have to install a floor board brace for the RVIBarke3 or remove floor mat for it to work?

Thanks

I didn’t have to do either.

 

[Tygger5]

For those using the RVIBrake3 System what pressure setting did you use?

Thanks

Sponsored