Maverick Cow Logo

[Jetlat7878$]

I have been looking for a chrome Maverick Logo similar to the one in the Maverick Truck Club logo.
One that looks modern not so much like a Longhorn cow. Something to use on the tailgate about 3" wide
and 1.5" tall or so. Please let me know if you find one. Thanks, jim

Sponsored

 

[Nunyabiznus]

Made this at work. It's reflected White. It's about the right size

 

[Maverickman74]

Have you looked at all the classic Maverick ones? Might be something there for ya.

 

[Jetlat7878$]

Have you looked at all the classic Maverick ones? Might be something there for ya.

The only ones I have seen is the old Maverick spelled out with the cow head above the lettering. I'm looking for that cow head without the lettering.

 

[Maverickman74]

The only ones I have seen is the old Maverick spelled out with the cow head above the lettering. I'm looking for that cow head without the lettering.

Can a 3d printed piece be chromed? Give somebody the design and make it how ya want it. If ya do, make a few and hang in to them, you or someone will want it one day.

Also I'm pretty sure I have heard of 3d printed metal before. Might be worth a Google.

 

[jorl]

Hmmmm? ETSY

I have been looking for a chrome Maverick Logo similar to the one in the Maverick Truck Club logo.
One that looks modern not so much like a Longhorn cow. Something to use on the tailgate about 3" wide
and 1.5" tall or so. Please let me know if you find one. Thanks, jim

 

[Ike]

Have you looked at all the classic Maverick ones? Might be something there for ya.

 

[Ike]

I have the original classic metal/chrome Maverick logo. $25 from eBay. Looks sharp on the rear tailgate.

 

[Mojoh]

Made this at work. It's reflected White. It's about the right size

 

[Mojoh]

Pretty much cow free here. but what about a Surfin' Safari?!? Heading that way couple weeks, not drivin!

 

[Mervin the Maverick]

Made this at work. It's reflected White. It's about the right size

Yup!
It’s a cow logo.

 

[TCPTX65]

Can a 3d printed piece be chromed? Give somebody the design and make it how ya want it. If ya do, make a few and hang in to them, you or someone will want it one day.

Also I'm pretty sure I have heard of 3d printed metal before. Might be worth a Google.

They make "shiny silver" filament. You can print the logo and either use the heated head to "iron" the top layer flat or use acetone to get rid of the lines.

 

[DanoW]

 

[Timothyd]

Hmmmm? ETSY

Now that's nice!

 

[Timothyd]

I have been looking for a chrome Maverick Logo similar to the one in the Maverick Truck Club logo.
One that looks modern not so much like a Longhorn cow. Something to use on the tailgate about 3" wide
and 1.5" tall or so. Please let me know if you find one. Thanks, jim

Sponsored