looking for ideas on how to hard wiring radar detector and dash cam

[yb98]

title says it all is there anyway I could pull it from the camera for lane centering?

Sponsored

 

[Sticks]

There are several threads on getting 12V power there, typically for aftermarket dimming mirrors.

This post has the Molex parts needed. Pinout info should be elsewhere in the thread.

https://www.mavericktruckclub.com/f...ming-homelink-mirror.8346/page-47#post-360643

 

[Matso]

I used fuse 18 in the BCM box to power on the dashcam during startup. This fuse is for the wireless charging pad if you have one. I have no use for the pad so it works well for me. If memory serves, I used fuse position no. 24 for accessory power when the vehicle is off. This position also has the advantage of not being used, and it's very accessible. I think these two fuse positions have the least potential for screwing anything else up.

Sponsored