Installing Tremor lower bumper on standard Maverick?

[Hagzfilmz]

The best improvement I’ve seen on the Tremor is the improved approach angle with the front bumper lower section. Have any of you modifiers attempted to make something similar or possibly alter the tremor version to fit on a Non-Tremor Maverick ? I think this would be a hot selling after market item if it was produced.

Sponsored

 

[volksnuts]

I'm sure it would be no different than adding the FX4 lower piece

 

[CSmith]

This provides some insight -

https://www.mavericktruckclub.com/f...er-swap-out-with-2022-fx4-front-bumper.25400/

 

[Hagzfilmz]

I'm sure it would be no different than adding the FX4 lower piece

That probably would work but The FX4 Maverick only has a 21.6 approach angle compared to a Tremor 30.7 mainly due to the revised lower bumper.

 

[Hagzfilmz]

This provides some insight -

https://www.mavericktruckclub.com/f...er-swap-out-with-2022-fx4-front-bumper.25400/

Thanks ! Looks like we can pray for the After Market Gods To create something other than the stock snowplow that is currently attached on the Maverick

 

[PCK]

That probably would work but The FX4 Maverick only has a 21.6 approach angle compared to a Tremor 30.7 mainly due to the revised lower bumper.

I am not in possession of any Maverick, Tremor or otherwise, but I understood that it is not just the front bumper facia which is different but a different, smaller radiator that is further from the ground. This is, I believe, the reason the Tremor does not have a FX4 option- insufficient cooling for the engine with the smaller radiator. If so, the Tremor bumper would not fit over the large non-Tremor radiator.

 

[volksnuts]

That probably would work but The FX4 Maverick only has a 21.6 approach angle compared to a Tremor 30.7 mainly due to the revised lower bumper.

No difference meaning the piece attaches the same

 

[Hagzfilmz]

I am not in possession of any Maverick, Tremor or otherwise, but I understood that it is not just the front bumper facia which is different but a different, smaller radiator that is further from the ground. This is, I believe, the reason the Tremor does not have a FX4 option- insufficient cooling for the engine with the smaller radiator. If so, the Tremor bumper would not fit over the large non-Tremor radiator.

Thanks this all makes sense

 

[NoVaJimmy]

I am not in possession of any Maverick, Tremor or otherwise, but I understood that it is not just the front bumper facia which is different but a different, smaller radiator that is further from the ground. This is, I believe, the reason the Tremor does not have a FX4 option- insufficient cooling for the engine with the smaller radiator. If so, the Tremor bumper would not fit over the large non-Tremor radiator.

Do you mean 4K tow option? That would make sense if there is less cooling capacity as to why it is not able to be optioned with 4K tow, I know that towing puts a lot more strain on the cooling system. Probably that in combination with the softer springs are what keeps the 4k tow package from being optioned on the Tremor.

 

[PCK]

Do you mean 4K tow option? That would make sense if there is less cooling capacity as to why it is not able to be optioned with 4K tow, I know that towing puts a lot more strain on the cooling system. Probably that in combination with the softer springs are what keeps the 4k tow package from being optioned on the Tremor.

Quite right- I meant 4k tow package. CSmith in message 3 links to posting that says the same thing.

 

[Montana]

I'd love to see a Tremor with the bumper off compared to an FX4 without the 4k option with it's bumper off.

I'd gladly be the guinea pig on this mod if I could get a general ball park estimate that it will work. And if I could find the bumper

Sponsored