How to Remove Cover Above Rear View Mirror?

[Johnkn]

In a XLT Luxury, there is a black plastic cover above the rear view mirror and it appears to have a speaker in it. How is it removed? I see what appears to be a pin on the left side... ??

Thanks


.

Sponsored

 

[CLH917]

Panel popping tools.

 

[Johnkn]

I’ve got the tools, just not sure what that pin is.. I see no way to pull it out, and it doesn’t appear to push in.


.

 

[oljackfrost]

In a XLT Luxury, there is a black plastic cover above the rear view mirror and it appears to have a speaker in it. How is it removed? I see what appears to be a pin on the left side... ??

Thanks


.

That black housing contains the CoPilot 360 camera. Chances are good you'll screw it up poking around in there..

 

[ffoc01]

It covers the front camera assembly. It's held up with 2 steel clips by the headliner and 2 plastic clips going into the camera bracket. I'm not sure, but the "pin" your talking about is actually the interior temperature sensor and is mounted behind the cover. Also, no speaker, just a ventilation grille.

 

[Johnkn]

Ok, thanks all, I'll dive in tomorrow. I have no 360 on this truck. I could swear that it was a speaker mounted there when I had my hand held up to it with Stairway to Heaven blasting, bu t I could be wrong. LOL


I'll give it a shot tomorrow and post pics of my finding for the group. Getting ready to wire my V1.

More to come.. thanks

 

[oljackfrost]

Ok, thanks all, I'll dive in tomorrow. I have no 360 on this truck. I could swear that it was a speaker mounted there when I had my hand held up to it with Stairway to Heaven blasting, bu t I could be wrong. LOL


I'll give it a shot tomorrow and post pics of my finding for the group. Getting ready to wire my V1.

More to come.. thanks

Every Maverick has the CoPilot 360 emergency braking. The optional 360 is the blind spot and rear cross traffic.

 

[JackZ]

Just pops off. I removed mine to run wires for my front/rear dash cameras. Used a nylon tool that I have for interior panel removal. Piece of cake. Can’t hurt anything as long as you are careful.

 

[Johnkn]

thanks all!

 

[Mavforever]

Just pops off. I removed mine to run wires for my front/rear dash cameras. Used a nylon tool that I have for interior panel removal. Piece of cake. Can’t hurt anything as long as you are careful.

I think myself and the forum would really like a detailed post or video on removing that panel and install of car cam power. Would be great if you could. Thanks

 

[Irvinec32]

I think myself and the forum would really like a detailed post or video on removing that panel and install of car cam power. Would be great if you could. Thanks

Here you go

Sponsored