Ford Maverick 2022 Compatible Cubby Storage Box

[cjheller]

Could not find a 3d printed accessories page, but if anyone is interested decided to make the dash cubby a little more useful and created a storage container for the dash. Made out of PETG so you don't have to worry about the material getting damaged or warped!

Link: https://www.etsy.com/listing/118768...-compatible-cubby?ref=listing_published_alert

Sponsored

 

[HiYoAu]

Man, you guys are fancy. I trimmed up an old membership card using CAD ( Cardboard Aided Design) and trimmed a couple plastic L brackets to lock the front panel in place with double back tape and voilà.

Had some scrap outdoor carpet that I taped at the bottom to reduce rattle noises.

 

[Meintc]

Man, you guys are fancy. I trimmed up an old membership card using CAD ( Cardboard Aided Design) and trimmed a couple plastic L brackets to lock the front panel in place with double back tape and voilà.

Had some scrap outdoor carpet that I taped at the bottom to reduce rattle noises.

Love it. DIY at its best.

 

[cjheller]

Man, you guys are fancy. I trimmed up an old membership card using CAD ( Cardboard Aided Design) and trimmed a couple plastic L brackets to lock the front panel in place with double back tape and voilà.

Had some scrap outdoor carpet that I taped at the bottom to reduce rattle noises.

If it works, it ain't stupid. I had to make this 20 times technically to get it perfect. Kept making small tweaks. Wife saw the trash pile and told me I better at least list it somewhere lol.

 

[Jcj280]

Ohh dude! I think I just bought one of these from you on EBay (The Oregon buyer). Have been racking my brain as to what could possibly go in the weird hole, and this fits the bill. Got an orange one to match the orange in the XLT. If I did get this from you, thanks in advance!

 

[cjheller]

You probably did. Ironically nobody orders orange and I wasn't happy with how the last one turned out since the filament was bad. Have more in today so after printing time it should be in the mail Wednesday.

 

[HybridNiroGuy]

Could not find a 3d printed accessories page, but if anyone is interested decided to make the dash cubby a little more useful and created a storage container for the dash. Made out of PETG so you don't have to worry about the material getting damaged or warped!

Link: https://www.etsy.com/listing/118768...-compatible-cubby?ref=listing_published_alert

If you start selling these again, could you let me know? Thanks!

Also what size is the front on the drawer? Would like to find a flux capacitor sticker to put on it

 

[cjheller]

I still sell them on eBay still, I honestly just hate making them since they take a bit of time. 66x57mm. I should have them back on Etsy soon

 

[HybridNiroGuy]

Great thank you, will be ordering when I get my Maverick. Thanks

 

[cjheller]

No problem! Hopefully it comes soon! Great little truck

 

[Maverick Grabber]

I'm putting an aquarium in mine

Sponsored