Fog Lights Design Poll - Vote Here

[Maxzina]

Hello MTC members,


We have designed several styles of fog lights, which can be selected below the comment section and also provide feedback on how to design them. This is our first time dealing with fog light products, and we welcome any modification suggestions at any time!


Total 4 choice.Put A/B/C/D on the comment section.

Section A

Section B

Section C

Section D

Sponsored

 

[ArmyAviatr]

maybe incorporate the old steer head from the 70'S as the light.

 

[Maverick Country Club]

Type A could utilize these…

 

[Aleks]

please make something compatible with '15-20 f150 fog lights for the 25/26 mavericks, since diode dynamics wont make an updated kit.

https://www.diodedynamics.com/elite...iQ1nfaUnnFrsA4mgdnHacnFJFEAEHXx1HOyLiNZUJx-d9

 

[Cancunbadlands]

My vote for the "A" shape as it is in
the 2023 Ford Bronco Sport (standard on higher trims like the Outer Banks and Badlands, and optional on others) features a specialized LED fog light system integrated into the lower front bumper. Its structure is designed for both durability on the trail and road-legal visibility.


Here is a breakdown of the structure:

1. Housing and External Design

• Bezel Integration: The fog lights are recessed into the "fog pockets" located on the far left and right edges of the lower front bumper. This placement is low to the ground to project light underneath the fog layer.

• Material: The factory units use a high-impact ABS plastic housing with a matte black finish to match the rugged exterior trim of the Bronco Sport.

• Lens: They feature a clear, hard-coated polycarbonate lens that is resistant to rock chips and debris commonly encountered during off-road driving.

2. Internal Lighting Technology

• Full LED Configuration: Unlike older halogen systems, these are self-contained LED assemblies. They do not use traditional replaceable bulbs; instead, the LEDs are integrated into a circuit board within the sealed housing.
• TIR Optics: The structure often utilizes Total Internal Reflection (TIR) optics, which focus the LED light into a wide, horizontal beam with a sharp "cutoff" at the top to prevent glare for oncoming drivers.

• Color Temperature: The factory LEDs typically output a "Cool White" light (approximately 6000K), though many owners swap them for selective yellow units for better performance in heavy snow or dust.

 

[Maxzina]

My vote for the "A" shape as it is in
the 2023 Ford Bronco Sport (standard on higher trims like the Outer Banks and Badlands, and optional on others) features a specialized LED fog light system integrated into the lower front bumper. Its structure is designed for both durability on the trail and road-legal visibility.


Here is a breakdown of the structure:

1. Housing and External Design

• Bezel Integration: The fog lights are recessed into the "fog pockets" located on the far left and right edges of the lower front bumper. This placement is low to the ground to project light underneath the fog layer.

• Material: The factory units use a high-impact ABS plastic housing with a matte black finish to match the rugged exterior trim of the Bronco Sport.

• Lens: They feature a clear, hard-coated polycarbonate lens that is resistant to rock chips and debris commonly encountered during off-road driving.

2. Internal Lighting Technology

• Full LED Configuration: Unlike older halogen systems, these are self-contained LED assemblies. They do not use traditional replaceable bulbs; instead, the LEDs are integrated into a circuit board within the sealed housing.
• TIR Optics: The structure often utilizes Total Internal Reflection (TIR) optics, which focus the LED light into a wide, horizontal beam with a sharp "cutoff" at the top to prevent glare for oncoming drivers.

• Color Temperature: The factory LEDs typically output a "Cool White" light (approximately 6000K), though many owners swap them for selective yellow units for better performance in heavy snow or dust.

Nice idea！

 

[Maxzina]

Type A could utilize these…

So cool！

 

[Hanzzolo]

D for sure. They need to be functional, not just for aesthetics. That said, you could for sure sell ad on covers for people that would want them. Just have them snap on.

 

[Maxzina]

D for sure. They need to be functional, not just for aesthetics. That said, you could for sure sell ad on covers for people that would want them. Just have them snap on.

D is also available for owners in our FB group. The most commonly chosen options currently are A and D.

 

[J..R..]

Hello MTC members,


We have designed several styles of fog lights, which can be selected below the comment section and also provide feedback on how to design them. This is our first time dealing with fog light products, and we welcome any modification suggestions at any time!


Total 4 choice.Put A/B/C/D on the comment section.

Section A

Section B

Section C

Section D

D works for me. Understated and practical.

-J..R..-

 

[Karma]

My choice would be D for practicality, with A a close second.

 

[lajlmt]

D for sure. They need to be functional, not just for aesthetics. That said, you could for sure sell ad on covers for people that would want them. Just have them snap on.

I agree D

 

[FSU TONY]

I like C. The lines would blend better with the model year 25/26 Headlights.

 

[ABTremor]

How about an option that will fit the Tremor and FX4 with the factory tow hooks ??

 

[FSU TONY]

Make it a simple install please whatever you do. Also looking for yellow grill lights that are easy fit for the 25/26 as there are for previous models.

Sponsored