FITS System Fusion 360 Drafting dimensions

[NCbronco]

If that's what your aiming for I will raise the walls to 5 inches. That should hold a little over half the tumbler and be touching the thicker part.

Let`s back up to 4 inches, that`s deep enough. Do you have anything else that you have made that I could see how it turned out ?

Sponsored

 

[Ganfan]

68 mm is like 2.5 inchs, is that going to be deep enough for a YETI® 30 oz Tumbler ? I don`t think they would handle a tall tumbler. What do you think ? The holes don`t really bother me one way or another, it may save on weight if you do have them.

New longer length to fit a 30 oz YETI

 

[Vickyfortin1985]

I would buy a trash can in orange!

 

[NCbronco]

New longer length to fit a 30 oz YETI

A Coke can is only about 4.5 inches tall, I want to be able to put a can in them and be able to get the can out without problems. It would be hard to get hold of the can in a 5 inch tall. So I think the 4 inch is what I need. Thanks

 

[Ganfan]

A Coke can is only about 4.5 inches tall, I want to be able to put a can in them and be able to get the can out without problems. It would be hard to get hold of the can in a 5 inch tall. So I think the 4 inch is what I need. Thanks

With a can and yeti to scale.

 

[NCbronco]

With a can and yeti to scale.

That`s fine if you think the can will stick up enough to be able to grab it easy. I have another question about the durability of the material you are using. Will it hold up over time ? Thanks

 

[Ganfan]

That`s fine if you think the can will stick up enough to be able to grab it easy. I have another question about the durability of the material you are using. Will it hold up over time ? Thanks

I'm printing in ABS. Same stuff that your house pipes for grey water are made of. So the durability is very high.

 

[Ganfan]

I would buy a trash can in orange!

Here is a garbage holder. The idea is that you put a plastic bag through the orange ring and the black ring goes over and locks it into place. Still working on a full bodied version

 

[Ganfan]

The Triple >

 

[Vickyfortin1985]

The Triple >

Yess! I love it! Do you have a Etsy shop or another online shop?

 

[Vickyfortin1985]

Here is a garbage holder. The idea is that you put a plastic bag through the orange ring and the black ring goes over and locks it into place. Still working on a full bodied version

Nice!!!

 

[NCbronco]

With a can and yeti to scale.

Hey Mark, Just wandering if you ever got the orange double cup holder made yet ? Thanks

 

[Ganfan]

Hey Mark, Just wandering if you ever got the orange double cup holder made yet ? Thanks

Its printing right now. Had to go through a bunch of different versions to perfect it. Il post a pic once its done.

 

[Ganfan]

Hey Mark, Just wandering if you ever got the orange double cup holder made yet ? Thanks

Hey!

I got it listed on the shop > https://www.etsy.com/ca/shop/FITStheMaverick

Its called the Dually

Thread:
https://www.mavericktruckclub.com/forum/threads/fits-3d-printed-etsy-shop-fitsthemaverick.5059/

 

[Ganfan]

Yess! I love it! Do you have a Etsy shop or another online shop?

Were live now!

https://www.etsy.com/ca/shop/FITStheMaverick

Sponsored